IPX device properties 11.. NNeett nnuummbbeerr This number is determined by the router of the physical network you're attached to. Leave the default value (the one which is present there just after the IPX entry was created) to use the entry for all network number match. 22.. DDeevviiccee The network-interface associated with Net Number. Use a "*" (asterisk) to match all devices. 33.. FFrraammee ttyyppee The frame-type of the data-packets on your local network. Options available: 33..11.. eetthheerrnneett__iiii Best for mixed (ipx, ip) environments. 33..22.. 880022..22 Novell uses this as default since 3.12. 33..33.. 880022..33 Older frame type, some boot ROMs use it. 33..44.. ssnnaapp Normally not used. 33..55.. ttookkeenn For token ring cards. 33..66.. aauuttoo Automatic detection of the frame-type used in your ipx-environment. !!! NOTE !!! Automatic detection here means that ipx-interfaces which are created by other instances than the server/router, e.g. pppd, ipppd or ipx_interface, will be detected and inserted/removed in internal device/routing table at runtime. 44.. TTiicckkss ((ooppttiioonnaall)) The time data-packets need to get delivered over a certain interface. If your connection goes through several routers, the shortest path can be determined by summing up all ticks for every route and compare the results. (1 tick = 1/18th second), default is 1 tick. Note: If ticks > 6 then the internal router handles RIP/SAP specially. (RIP/SAP filtering)