@version 0
# *** new message
# *** updated message
!T_SMTPDRESTRICTION
    :Z Smtpd restriction
    :E Smtpd restrictions
# *** new message
# *** updated message
!T_SMTPDETRNREST
    :Z Smtpd etrn restriction
    :E etrn
# *** new message
# *** updated message
!F_ACTCHKCLIENTACCMAPTYPEMAPNAME
    :Z active check client access   maptype:mapname
    :E Check client access
# *** new message
# *** updated message
!F_CHKCLIENTACCMAPTYPEMAPNAME
    :Z check client access   maptype:mapname
    :E maptypes and mapnames
# *** new message
# *** updated message
!F_MAPTYPEMAPNAME
    :Z maptype:mapname
    :E maptypes and mapnames
# *** new message
# *** updated message
!T_SMTPDSNDREST
    :Z Smtpd sender restriction
    :E sender
# *** new message
# *** updated message
!F_ACTCHKSNDACCMAPTYPEMAPNAME
    :Z active check sender access   maptype:mapname
    :E Check sender access
# *** new message
# *** updated message
!F_CHKSNDACCMAPTYPEMAPNAME
    :Z check sender access maptype:mapname
    :E maptypes and mapnames
# *** new message
# *** updated message
!F_CHKCLIENTACCESS
    :Z check client access
    :E maptypes and mapnames
# *** new message
# *** updated message
!F_ACTCHKHELOACCMAPTYPEMAPNAME
    :Z active check helo access   maptype:mapname
    :E Check helo access
# *** new message
# *** updated message
!F_CHKHELOACCESS
    :Z check helo access
    :E maptypes and mapnames
# *** new message
# *** updated message
!T_SMTPDCLIENTREST
    :Z Smtpd client restriction
    :E client
# *** new message
# *** updated message
!T_SMTPDHELOREST
    :Z Smtpd helo restriction
    :E helo
# *** new message
# *** updated message
!F_CHKHELOACCMAPTYPEMAPNAME
    :Z check helo access maptype:mapname
    :E maptypes and mapnames
# *** new message
# *** updated message
!T_SMTPDRECREST
    :Z Smtpd recipient restriction
    :E recipient
# *** new message
# *** updated message
!F_ACTCHKRECACCMAPTYPEMAPNAME
    :Z active check recipient access   maptype:mapname
    :E Check recipient access
# *** new message
# *** updated message
!F_CHKRECACCMAPTYPEMAPNAME
    :Z check recipient access   maptype:mapname
    :E maptypes and mapnames
# *** new message
!X_MAPTYPEMAPNAMEEX
    :E (maptype:mapname, maptype:mapname, ...)
# *** new message
!F_ACTIVATECHECKBOX
    :E active
# *** new message
!X_DOMAINS_COMMENTS
    :E Domains\tComments
# *** new message
!X_ADDRESS_REDIRS
    :E Addresses\tRedirections
# *** new message
!X_YES
    :E yes
# *** new message
!X_NO
    :E no
# *** new message
!F_ALLOWPERCHACK
    :E Allow percent hack
# *** new message
!F_APPENDATMYORIGIN
    :E Append at origin
# *** new message
!F_APPENDDOTDOMAIN
    :E Append dot domain
# *** new message
!F_EMPTYADRSREC
    :E Empty address recipient
# *** new message
!F_MASQDOMAINS
    :E Masquerade domains
# *** new message
!F_MASQEXCEPTIONS
    :E Masquerade exceptions
# *** new message
!F_SWPBANGPATH
    :E Swap bangpath
# *** new message
!T_ADDRESSMASQ
    :E Configure address masquerading
# *** new message
!I_ADDRESSMASQ
    :E Here you can configure options that control address rewriting
# *** new message
!N_MISSING
    :E %s does not exist
# *** new message
!N_NOEXEC
    :E %s is not executable
# *** new message
!F_ALIASNAME
    :E alias name
# *** new message
!F_FILTER
    :E Filter program
# *** new message
!F_LISTFILE
    :E List file
# *** new message
!T_ONEALIAS
    :E One alias definition
# *** new message
!I_ONEALIAS
    :E Use the button ADD to get more space\nin case you are defining a mailing list\n
# *** new message
!P_EDITALIAS
    :E edit an alias
# *** new message
!E_NONAME
    :E You must provide a name
# *** new message
!E_ALLEMPTY
    :E All values are empty
# *** new message
!E_DUPALIAS
    :E Duplicate alias, rejected
# *** new message
!H_MALIASES
    :E Aliases
# *** new message
!I_NEWALIAS
    :E Select [Add] to add a new alias
# *** new message
!T_EDITALIASES
    :E Here, you can find a list of alias.
# *** new message
!I_EDITALIASES
    :E You are allowed to edit/add/delete\nsystem wide aliases for electronic mail
# *** new message
!P_WRITE
    :E write %s
# *** new message
!T_LOCALPATH
    :E Local path information
# *** new message
!F_DIRPATH
    :E Queue directory
# *** new message
!F_COMMDIR
    :E Command directory
# *** new message
!F_DAEMDIR
    :E Daemon directory
# *** new message
!T_QUEUEPROCOWN
    :E Queue and process ownership
# *** new message
!F_MAILOWNER
    :E Mail owner
# *** new message
!F_DEFPRIVI
    :E Default privileges
# *** new message
!T_NETHOSTDOMNAMES
    :E Internet host and domain names
# *** new message
!F_HOSTNAME
    :E Hostname
# *** new message
!F_DOMAIN
    :E Domain
# *** new message
!T_SENDINGMAIL
    :E Sending mail
# *** new message
!X_HOSTNAME
    :E hostname
# *** new message
!X_DOMAIN
    :E domain
# *** new message
!F_MYORIGIN
    :E Origin
# *** new message
!T_RECEIVINGMAIL
    :E Receiving mail
# *** new message
!X_ALL
    :E all
# *** new message
!X_HOSTNAMELOCALHOST
    :E hostname, localhost
# *** new message
!F_INETINETRFACES
    :E Network interfaces
# *** new message
!F_MYDESTINATION
    :E Destination
# *** new message
!T_REJUNKLOCUSER
    :E Rejecting unknown local users
# *** new message
!F_LOCRECMAPS
    :E Local recipient maps
# *** new message
!T_DEBUGGINGCTRL
    :E Debugging control
# *** new message
!F_DEBUGPEERLEVEL
    :E Debug peer level
# *** new message
!F_DEBUGPEERLST
    :E Debug peer list
# *** new message
!F_DEBUGGERCMD
    :E Debugger command
# *** new message
!B_SETTODEFAULT
    :E Set to default
# *** new message
!N_NOTEMPTY
    :E This option can't be left empty!
# *** new message
!T_BASIC
    :E Basic Postfix configuration
# *** new message
!T_RESTORETODEFAULT
    :E Default values
# *** new message
!N_RESTORETODEFAULT
    :E Are you sure you want to restore the default values?\n
      +\n
      +Note that you won't be able to undo these changes.
# *** new message
!F_CANNAME
    :E name
# *** new message
!F_CANADDRESS
    :E address
# *** new message
!T_ONECANONICAL
    :E One canonical table item definition
# *** new message
!I_ONECANONICAL
    :E Edit a canonical table item definition
# *** new message
!P_EDITCANONICAL
    :E edit canonical
# *** new message
!E_NOADRESS
    :E You must provide an address
# *** new message
!H_CANITEM
    :E Canonical items
# *** new message
!I_NEWCANINICAL
    :E Select [Add] to add a new canonical item
# *** new message
!T_CANTABLEEDIT2
    :E Here, you can find a list of canonical maps.
# *** new message
!I_CANTABLEEDIT
    :E You are allowed to edit/add/delete\ncanonical items
# *** new message
!F_INITDESTCONC
    :E Initial destination concurrency
# *** new message
!F_MAXBACKOFFTIME
    :E Maximal backoff time
# *** new message
!F_MAXQUEUELIFETIME
    :E Maximal queue lifetime
# *** new message
!F_MINBACKOFFTIME
    :E Minimal backoff time
# *** new message
!F_QUEUERUNDELAY
    :E Queue run delay
# *** new message
!F_DEFERTRANS
    :E Defer transports
# *** new message
!T_CTRLDELIVRATES
    :E Control delivery rates
# *** new message
!I_CTRLDELIVRATES
    :E Here you can configure postfix options that control delivery rates
# *** new message
!T_OVERRLOCALTRANSP
    :E Override local transport
# *** new message
!F_LOCAL_TRANSP
    :E Local transport
# *** new message
!T_SECURITYCTRL
    :E Security controls
# *** new message
!F_LOCALCOMMSHELL
    :E Local command shell
# *** new message
!F_FWDPATH
    :E Forward path
# *** new message
!F_ALLOWMAILTOCMD
    :E Allow mail to commands
# *** new message
!F_ALLOWMAILTOFILES
    :E Allow mail to files
# *** new message
!T_DELIVTO
    :E Delivered-to
# *** new message
!F_LOCDESTRECLIM
    :E Local destination recipient limit
# *** new message
!T_PREPDELIVHEADER
    :E Prepend delivered header
# *** new message
!T_CTRLLOCALDELIV
    :E Control local delivery
# *** new message
!I_CTRLLOCALDELIV
    :E Here you can configure postfix options that control local delivery
# *** new message
!F_LDAPLKPTOUT
    :E Ldap lookup timeout
# *** new message
!F_LDAPSEARCHBASE
    :E Ldap search base
# *** new message
!F_LDAPSRVHOST
    :E Ldap server host
# *** new message
!T_LDAPLOOKUPTOUT
    :E Configure LDAP lookups
# *** new message
!I_LDAPLOOKUPTOUT
    :E Here you can configure options that control LDAP lookups
# *** new message
!F_ALWAYBCC
    :E Always bcc
# *** new message
!F_DAEMONTOUT
    :E Daemon timeout
# *** new message
!X_DBM
    :E dbm
# *** new message
!X_HASH
    :E hash
# *** new message
!X_BTREE
    :E btree
# *** new message
!F_DEFDATABASETYPE
    :E Default database type
# *** new message
!X_SMTP
    :E smtp
# *** new message
!X_UUCP
    :E uucp
# *** new message
!F_DEFTRANSP
    :E Default transport
# *** new message
!F_DBLBNCESND
    :E Double bounce sender
# *** new message
!F_HASHQUEUEDEPTH
    :E Hash queue depth
# *** new message
!F_HASHQUEUENAM
    :E Hash queue names
# *** new message
!F_HOPCOUNTLIM
    :E Hopcount limit
# *** new message
!F_IPCIDLE
    :E Ipc idle
# *** new message
!F_IPCTIMEOUT
    :E Ipc timeout
# *** new message
!F_MAILNAME
    :E Mail name
# *** new message
!F_MAILVERSION
    :E Mail version
# *** new message
!F_MAXIDLE
    :E Max idle
# *** new message
!F_MAXUSE
    :E Max use
# *** new message
!F_NOTIFYCLASSES
    :E Notify classes
# *** new message
!T_NOTICES
    :E notices
# *** new message
!F_BNCNOTREC
    :E Bounce notice recipient
# *** new message
!F_2BNCNOTREC
    :E 2Bounce notice recipient
# *** new message
!F_DELAYNOTREC
    :E Delay notice recipient
# *** new message
!F_ERRORNOTREC
    :E Error notice recipient
# *** new message
!F_PROCIDDIR
    :E Process id directory
# *** new message
!F_PRGMDIR
    :E Program directory
# *** new message
!F_SUNMAILTOOLCOMP
    :E Sun mailtool compatibility
# *** new message
!F_TRIGGERTOUT
    :E Trigger timeout
# *** new message
!F_DELAYWARNINGTOUT
    :E Delay warning timeout
# *** new message
!T_MISCELLANEOUSCONF
    :E Miscellaneous configuration
# *** new message
!I_MISCELLANEOUSCONF
    :E Here you can configure the miscellaneous postfix parameters
# *** new message
!M_POSTFIXCONF
    :E Postfixconf
# *** new message
!T_USAGE
    :E Module postfixconf\n
      +linuxconf --modulemain postfixconf [ specific options ]\n
      +\n
      +    --virtualedit [ path ]\n
      +    --aliasedit [ path ]\n
      +    --canonicaledit [ path ]\n
      +    --variables (list of the recognized variables by module)\n
      +    --setvariable variable [value]\n
      +\n
# *** new message
!E_FILENOTFOUND
    :E File '%s' not found!
# *** new message
!E_READING
    :E Error reading file '%s'
# *** new message
!E_GETTINGDEFVAL
    :E Error getting default values
# *** new message
!M_BASICINF
    :E Basic information
# *** new message
!M_ADDMASQ
    :E Address masquerading
# *** new message
!M_SMTPCLPRGM
    :E Smtp client program
# *** new message
!M_SMTPSERVPRGM
    :E Smtp server program
# *** new message
!M_MISC
    :E Miscellaneous
# *** new message
!M_RESCTRLPARAM
    :E Resource controls parameters
# *** new message
!M_LDAPLKPTOUT
    :E Ldap lookup timeout
# *** new message
!M_CTRLOCDEL
    :E Control local delivery
# *** new message
!M_CTRLDELRATES
    :E Control delivery rates
# *** new message
!M_MSPAMCTRL
    :E Spam controls
# *** new message
!M_TABLELOC
    :E Table locations
# *** new message
!M_VIRTUAL
    :E Virtual tables
# *** new message
!M_ALIASES
    :E Aliases tables
# *** new message
!M_CANONICAL
    :E Canonical tables
# *** new message
!M_CONFIGURATION
    :E View configuration
# *** new message
!M_CONFIG
    :E Configure
# *** new message
!M_EDIT
    :E Edit
# *** new message
!T_POSTFIX
    :E Postfix configurator
# *** new message
!I_POSTFIX
    :E This package allows you to configure\nPostfix, the mail system configurator\n
# *** new message
!I_GENPOSTFIX
    :E You have modified postfix's configuration.\n
      +A new %s must be generated.\n
      +Do you want to do it now
# *** new message
!N_WARNING
    :E Generate file
# *** new message
!E_BACKUPFILE
    :E Couldn't write backup file
# *** new message
!E_SAVING
    :E Couldn't save changes on '%s'
# *** new message
!E_REMOVEDEFAULTFILE
    :E Couldn't remove temporary file '%s'
# *** new message
!F_BNCSIZELIMIT
    :E Bounce size limit
# *** new message
!F_COMMTIMELIMIT
    :E Command time limit
# *** new message
!F_DEFPROCCLIMIT
    :E Default process limit
# *** new message
!F_DELIVLOCKATMPS
    :E Deliver lock attempts
# *** new message
!F_DELLOCKDELAY
    :E Deliver lock delay
# *** new message
!F_DUPFILTERLIMIT
    :E Duplicate filter limit
# *** new message
!F_FORKATTEMPTS
    :E Fork attempts
# *** new message
!F_FORKDELAY
    :E Fork delay
# *** new message
!F_HEADERSIZELIMIT
    :E Header size limit
# *** new message
!F_LINELENGLIMIT
    :E Line length limit
# *** new message
!F_MSGSIZELIMIT
    :E Message size limit
# *** new message
!F_QMGRMSGACTLIMIT
    :E qmgr message active limit
# *** new message
!F_QMGRMSGRECLIMIT
    :E qmgr message recipient limit
# *** new message
!F_QUEUEMINFREE
    :E Queue minfree
# *** new message
!F_STALELOCKTIME
    :E Stale lock time
# *** new message
!F_TRANSRETTIME
    :E Transport retry time
# *** new message
!T_RESSCTRLPARAM
    :E Configure general parameters
# *** new message
!I_RESSCTRLPARAM
    :E Here you can configure options that control address rewriting
# *** new message
!T_MISCCTRL
    :E Miscellaneous controls
# *** new message
!F_BESTMXTRANS
    :E Best mx transport
# *** new message
!F_FALLBACKRELAY
    :E Fallback relay
# *** new message
!F_IGNOREMXLOOKUPERR
    :E Ignore mx lookup error
# *** new message
!F_SMTPSKP4XXGREETING
    :E Smtp skip 4xx greeting
# *** new message
!F_SMTPSKPQUITRESP
    :E Smtp skip quit response
# *** new message
!T_RATECTRL
    :E Rate controls
# *** new message
!F_SMTPDESTCONCLIM
    :E Smtp destination concurrency limit
# *** new message
!F_SMTPDESTRECLIM
    :E Smtp destination recipient limit
# *** new message
!F_DEFDESTRECLIM
    :E Default destination recipient limit
# *** new message
!T_PARALELDELIVTOTHESAMEDEST
    :E Parallel delivery to the same destination
# *** new message
!F_LOCDESTCONCLIM
    :E Local destination concurrency limit
# *** new message
!F_DEFDESTCONCLIM
    :E Default destination concurrency limit
# *** new message
!T_TOUTCTRL
    :E Timeout controls
# *** new message
!F_SMTPCONNECTOUT
    :E Smtp connect timeout
# *** new message
!F_SMTPHELOTOUT
    :E Smtp helo timeout
# *** new message
!F_SMTPMAILTOUT
    :E Smtp mail timeout
# *** new message
!F_SMTPRCPTOUT
    :E Smtp rcpt timeout
# *** new message
!F_SMTPDATAINITOUT
    :E Smtp data init timeout
# *** new message
!F_SMTPDATAXFERTOUT
    :E Smtp data xfer timeout
# *** new message
!F_SMTPDATADONETOUT
    :E Smtp data done timeout
# *** new message
!F_SMTPQUITTOUT
    :E Smtp quit timeout
# *** new message
!T_DELIVTOMAILBOX
    :E Delivery to mailbox
# *** new message
!X_MBOX
    :E Mailbox
# *** new message
!X_MDIR
    :E Maildir/
# *** new message
!F_HOME_MAILBOX
    :E Home mailbox
# *** new message
!F_MAILSPOOLDIR
    :E Mail spool directory
# *** new message
!F_MAILBOXCMD
    :E Mailbox command
# *** new message
!F_MAILBOXTRANS
    :E Mailbox transport
# *** new message
!F_FALLBACKTRANS
    :E Fallback transport
# *** new message
!F_LUSERRELAY
    :E Luser relay
# *** new message
!T_CTRLSMTPCLIENTPRGM
    :E Control the SMTP client program
# *** new message
!I_CTRLSMTPCLIENTPRGM
    :E Here you can configure options that control the SMTP client program
# *** new message
!T_MISCELLANEOUS
    :E Miscellaneous
# *** new message
!F_DISVERCOMM
    :E Disable verify command
# *** new message
!F_SMTPDBANNER
    :E Smtpd banner
# *** new message
!F_SMTPDRECLIMIT
    :E Smtpd recipient limit
# *** new message
!F_SMTPDTOUT
    :E Smtpd timeout
# *** new message
!T_TARPITCTRL
    :E Tarpit Controls
# *** new message
!F_SMTPDERRSLEEPTIME
    :E Smtpd error sleep time
# *** new message
!F_SMTPDSOFTERRLIMIT
    :E Smtpd soft error limit
# *** new message
!F_SMTPDHARDERRLIMIT
    :E Smtpd hard error limit
# *** new message
!F_SMTPDHELOREQ
    :E Smtpd helo required
# *** new message
!T_RESPONSECODES
    :E response codes
# *** new message
!F_ACCESSMAPREJCODE
    :E Access map reject code
# *** new message
!F_INVALIDHSTNAMEREJCODE
    :E Invalid hostname reject code
# *** new message
!F_MAPSRBLREJCODE
    :E Maps rbl reject code
# *** new message
!F_REJECTCODE
    :E Reject code
# *** new message
!F_RELAYDOMREFCODE
    :E Relay domains reject code
# *** new message
!F_UNKADRSREJCODE
    :E Unknow address reject code
# *** new message
!F_UNKCLIENTREJCODE
    :E Unknow client reject code
# *** new message
!F_UNKHOSTNAMEREJCODE
    :E Unknown hostname reject code
# *** new message
!T_CTRLSMTPSRVPRGM
    :E Control the SMTP server program
# *** new message
!I_CTRLSMTPSRVPRGM
    :E Here you can configure options that control the SMTP server program
# *** new message
!T_ADDRESSEXT
    :E Address extensions
# *** new message
!F_RECDELIMITER
    :E Recipient delimiter
# *** new message
!T_JUNKMAILCTRL
    :E Junk mail controls
# *** new message
!F_HEADERCHECKS
    :E Header checks
# *** new message
!F_BODYCHECKS
    :E Body checks
# *** new message
!F_NETWORKS
    :E Networks
# *** new message
!T_ADDITIONALUCECTRL
    :E Additional UCE controls
# *** new message
!F_ALLOWUNTRUSTEDROUTING
    :E Allow untrusted routing
# *** new message
!F_MAPSRBLDOMAINS
    :E Maps rbl domains
# *** new message
!F_RELAYDOMAINS
    :E Relay domains
# *** new message
!F_RELAYHOST
    :E Relay host
# *** new message
!N_REJPERMSAMETIME
    :E You have the 'reject' and 'permit' parameters\n
      +on the same variable and it's not possible.\n
      +This option will be set to 'default' value
# *** new message
!F_REJREQCLIENTHOSTM
    :E reject the request if the client hostname is unknown
# *** new message
!F_PERMCLIENTADRSMATMYNET
    :E permit if the client address matches mynetworks
# *** new message
!F_REJIFCLIENTLSTDUNDER
    :E reject if the client is listed under \"maps rbl domains\"
# *** new message
!X_NONE
    :E none
# *** new message
!F_REJREQUEST
    :E reject the request
# *** new message
!F_PERMREQUEST
    :E permit the request
# *** new message
!F_REJINVHOSTNAME
    :E reject invalid hostname
# *** new message
!F_REJUNKHOSTNAME
    :E reject unknown hostname
# *** new message
!F_REJUNKSNDDOM
    :E reject unknown sender domain
# *** new message
!F_REJNONFQDNHOSTNAME
    :E reject non fqdn hostname
# *** new message
!F_REJNONFQDNSENDER
    :E reject non fqdn sender
# *** new message
!F_REJHELOHOSTNAMEBADSINTAXE
    :E reject HELO hostname with bad syntax
# *** new message
!F_REJHELOHOSTNAMEWITHOUTDNSMXREC
    :E reject HELO hostname without DNS A or MX record
# *** new message
!F_REJHELOHOSTNAMENOTFQDNFORM
    :E reject HELO hostname that is not in FQDN form
# *** new message
!F_REJSNDDOMWITHOUTAMXREC
    :E reject sender domain without A or MX record
# *** new message
!F_PERMONLYMAILTO
    :E check relay domains (see help)
# *** new message
!F_PERMMAILTO
    :E permit auth destination (see help)
# *** new message
!F_REJMAILUNLESSITSENTTO
    :E reject mail unless it is sent to... see help
# *** new message
!F_REJMAILFROMIMPRPIPELSPAM
    :E reject mail from improperly pipelining spamware
# *** new message
!F_ACPTMAILSITESTHATLSTMXHOST
    :E accept mail for sites that list me as MX host
# *** new message
!F_REJDOMWITHOUTAMXREC
    :E reject domains without A or MX record
# *** new message
!F_REJSNDADRSNOTFQDNFORM
    :E reject sender address that is not in FQDN form
# *** new message
!F_REJRECADRSNOTFQDNFORM
    :E reject recipient address that is not in FQDN form
# *** new message
!N_INVALIDDATA
    :E invalid data
# *** new message
!N_SMTPDRCPALERT
    :E NOTE: YOU MUST SPECIFY AT LEAST ONE OF THE FOLLOWING RESTRICTIONS\n
      +OTHERWISE POSTFIX REFUSES TO RECEIVE MAIL:\n
      +-reject the request\n
      +-permit only mail to... see help\n
      +-reject mail unless it is sent to... see help
# *** new message
!F_TRANSPMAPS
    :E Transport maps
# *** new message
!F_RELOCMAPS
    :E Relocated maps
# *** new message
!F_VIRTUALMAPS
    :E Virtual maps
# *** new message
!F_CANONICALMAPS
    :E Canonical maps
# *** new message
!F_RECCANONICALMAPS
    :E Recipient canonical maps
# *** new message
!F_SNDCANONICALMAPS
    :E Sender canonical maps
# *** new message
!F_ALIASMAPS
    :E Alias maps
# *** new message
!F_ALIASDATABASE
    :E Alias database
# *** new message
!T_TABLELOCATIONS
    :E Configure path tables
# *** new message
!I_TABLELOCATIONS
    :E Here you can configure the postfix tables path
# *** new message
!N_DATABASECHANGED
    :E The '%s' parameter was changed.\n
      +You must run 'postmap [file type:]file name'\n
      +to rebuild needed binary files. The module can\n
      +run such command only to try to generate DB,\n
      +DBM and HASH tables pointed by the parameter\n
      +\n
      +Other possible tables must be generated by the user\n
      +Do you want the module to try to generate the tables now?
# *** new message
!N_ALERT
    :E Alert!
# *** new message
!E_DATABASECHANGED
    :E An error occurred while executing '%s' command\nCommand was not executed.
# *** new message
!N_LOG
    :E Log:\n%s
# *** new message
!E_DATABASECHANGEDII
    :E An error occurred while executing \"%s%s\"\nCommand was not executed.
# *** new message
!N_VIRTUALTABLEEMPTY
    :E No valid path found\n
      +You can add a valid path in\n
      +Table locations -> Virtual maps\n
      +\n
      +See helpfile on this items
# *** new message
!H_VIRTTABLEPATHS
    :E Virtual table paths
# *** new message
!T_VIRTUALEDIT
    :E Virtual table edit
# *** new message
!I_DESCVIRTUALTABLE
    :E You are allowed to edit/add/delete\nvirtual tables
# *** new message
!N_TABLEEMPTY
    :E The '%s' table is empty.\nDo you want to remove it?
# *** new message
!T_REMOVETABLE
    :E remove table
# *** new message
!N_REMOVETABLE
    :E The '%s' file was removed!
# *** new message
!E_REMOVEPATHTABLE
    :E Couldn't remove PATH in '%s'
# *** new message
!E_REMOVEFILETABLE
    :E Couldn't remove '%s' file\nThe file could be removed before
# *** new message
!N_ALIASTABLEEMPTY
    :E No valid path found\n
      +You can add a valid path in\n
      +Table locations -> Alias maps\n
      +Table locations -> Alias database\n
      +\n
      +See helpfile on this items
# *** new message
!H_ALIASTABLEPATHS
    :E Alias table paths
# *** new message
!T_ALIASTABLEEDIT
    :E Alias table edit
# *** new message
!I_DESCALIASTABLE
    :E You are allowed to edit/add/delete\nsystem wide aliases for electronic mail
# *** new message
!N_CANTABLEEMPTY
    :E No valid path found\n
      +You can add a valid path in\n
      +Table locations -> Canonical maps\n
      +Table locations -> Recipient canonical maps\n
      +Table locations -> Sender canonical maps\n
      +\n
      +See helpfile on this items
# *** new message
!H_CANTABLEPATHS
    :E Canonical table paths
# *** new message
!T_CANTABLEEDIT
    :E Canonical table edit
# *** new message
!I_DESCCANONICALTABLE
    :E You are allowed to edit/add/delete\ncanonical tables
# *** new message
!F_VRTDOM
    :E Domain
# *** new message
!F_ANYTHING
    :E Comment
# *** new message
!T_ONEVIRTUAL
    :E One domain table item definition
# *** new message
!I_ONEVIRTUAL
    :E Here, you can edit/delete a domain name.\n
      +This domain will be used for address\n
      +redirections.
# *** new message
!P_EDITVIRTUAL
    :E edit a virtual
# *** new message
!E_FINDADRS
    :E Can't find address
# *** new message
!F_USERNAME
    :E Username
# *** new message
!T_ONEREDIRECT
    :E Redirection edit
# *** new message
!I_ONEREDIRECT
    :E Here, you can edit/delete a redirection.\n
# *** new message
!E_NODOMAIN
    :E You must provide a domain
# *** new message
!E_NOTVALIDDOMAIN
    :E This isn't a valid domain
# *** new message
!E_NOAT
    :E Invalid digit '@'
# *** new message
!E_NODOMAINS
    :E You don't have any domain!\nYou must have at least one domain\nin your table
# *** new message
!M_DOMAINNAMES
    :E Domain names
# *** new message
!M_REDIRECTIONS
    :E Redirections
# *** new message
!T_VIRTTABLEEDITPRINC
    :E Virtual table
# *** new message
!I_VIRTTABLEEDITPRINC
    :E The optional virtual table specifies redirections\n
      +for local and non-local recipients or domains.\n
      +You are allowed to edit/add/delete domain names\n
      +or address redirections
# *** new message
!E_EXECCOMM
    :E Can't execute command %s %s
# *** new message
!I_NEWDOMAIN
    :E Select [Add] to add a new domain item
# *** new message
!T_VIRTTABLEEDITDOMAIN
    :E Here, you can find a list of domains.
# *** new message
!I_VIRTTABLEEDITDOMAIN
    :E You are allowed to edit/add/delete\ndomain address
# *** new message
!I_NEWREDIRECTION
    :E Select [Add] to add a new redirection item
# *** new message
!T_VIRTTABLEEDITREDIRECTIONS
    :E Redirections
# *** new message
!I_VIRTTABLEEDITREDIRECTIONS
    :E You are allowed to edit\naddress redirections
# *** new message
!E_DUPVRTITEM
    :E Duplicate domain item, rejected
# *** new message
!E_DUPREDITEM
    :E Duplicate redirection item, rejected
# *** new message
!E_ONLYDIGIT
    :E Only digit are accept!
# *** new message
!N_DELDOMAIN
    :E You are attempting to delete a domain that\n
      +still contains redirections. You must erase them\n
      +before deleting the domain completely
# *** new message
!M_SUBPOSTFIX
    :E Postfix configuration