@version 0
# *** new message
# *** updated message
!I_SCOPE
    :Z This dialog let you configure the different commands\n
      +and daemon linuxconf is using.\n
      +If you deselect one command, then you must\n
      +managed this yourself. This facility\n
      +is provided to help integrate linuxconf into\n
      +a working setup.\n
      +*** Unless you know what you are doing ***\n
      +*** fiddling here is not recommended   ***\n
    :T 该对话框让你配制linuxconf 正在使用的命令和DAEMON\n
      +如果你不选者任一命令，你必须自己管理\n
      +这项功能使 linuxconf 能综合成一功能设定\n
      +***除非你已经清楚正在进行的功能***\n
      +***请不要乱试***\n
    :E This dialog let you configure the different commands\n
      +and daemons linuxconf is using.\n
      +If you deselect one command, then you must\n
      +manage this yourself. This facility\n
      +is provided to help integrate linuxconf into\n
      +a custom Linux installation.\n
      +*** Unless you know what you are doing ***\n
      +*** fiddling here is not recommended   ***\n
# *** new message
# *** updated message
!I_ROUTEHOSTS
    :Z If your network has access to other networks\n
      +you must tell how to reach those networks\n
    :T 如果你的网络和其他网络相连\n请指示连接方法\n
    :E If your network has access to remote hosts\n
      +you must tell how to reach those hosts\n
# *** new message
# *** updated message
!F_IPXNETNUM
    :Z Network number(0=probe) (hex)
    :T 网络地址(0=测试) (hex)
    :E Network number (hex)
# *** new message
# *** updated message
!F_IPXINTERNALNETNUM
    :Z Internal network number(opt)
    :T 内部网络地址(可选)
    :E Internal network number
# *** new message
# *** updated message
!F_IPXINTERNALNODENUM
    :Z Internal node number(opt)
    :T 内部接点地址（可选）
    :E Internal node number
# *** new message
# *** updated message
!I_HTMLACCESS
    :Z You can specify which networks or hosts are allowed\n
      +to access linuxconf to configure your computer\n
      +(They need a password still)\n
    :T 你可以设定那一网络和主机可以\n存取 linuxconf 来设定本机\n(可以设定密码)
    :E You can specify which networks or hosts are allowed\n
      +to access linuxconf to configure your computer\n
      +(They need a password still)\n
      +Linuxconf listen on port 98. Point your browser to\n
      +http://your_machine:98/
# *** new message
# *** updated message
!I_SERVICECTL
    :Z You can selectivly enable or disable\n
      +any services. You can disable services on a permanent\n
      +basis or on a temporary basis. Temporary means that\n
      +Linuxconf will remind you about those and will reactive\n
      +them at the next reboot.
    :T 你可选者启动或停用\n
      +任何服务，你可永久或暂时停用\n
      +这服务，暂时是指Linuxconf在下次启动时\n
      +提示你这项服务停用。
    :E You can selectivly enable or disable\n
      +any services. You can disable services on a permanent\n
      +basis or on a temporary basis. Temporary means that\n
      +Linuxconf will remind you about those and will reactivate\n
      +them at the next reboot.
# *** new message
# *** updated message
!T_HOSTHEAD
    :Z IP number\tname & aliases
    :T IP 地址\t名称及别名
    :E IP number\tname\taliases
# *** new message
# *** updated message
!F_NAMESERV1
    :Z nameserver 1
    :T 名称服务器1
    :E IP of name server 1
# *** new message
# *** updated message
!F_NAMESERV2
    :Z nameserver 2 (opt)
    :T 名称服务器2 (可选)
    :E IP of name server 2 (opt)
# *** new message
# *** updated message
!F_NAMESERV3
    :Z nameserver 3 (opt)
    :T 名称服务器3 (可选)
    :E IP of name server 3 (opt)
# *** new message
!I_ROUTENET
    :E If your network has access to other networks\n
      +you must tell how to reach those networks\n
# *** new message
!I_ROUTEALT
    :E If there are several IP networks sharing the same\n
      +physical network (wire), you must configure the routing\n
      +this here
# *** new message
!H_SERVICESTATUS
    :E Name\tEnabled\tRunning
# *** new message
!F_STATUS
    :E Status
# *** new message
!T_ONESERVICE
    :E Control one service
# *** new message
!I_ONESERVICE
    :E You can enable/disable a service\nor you can start and stop it manually
# *** new message
!I_PROBE
    :E Probe
# *** new message
!I_NONE
    :E None
# *** new message
!B_START
    :E Start
# *** new message
!B_STOP
    :E Stop
# *** new message
!B_RESTART
    :E Restart
# *** new message
!I_RUNNING
    :E Running
# *** new message
!X_EXECUTING
    :E Executing: %s\n
    :T 运行%s\n
# *** new message
!X_WOULDEXEC
    :E Would have executed \"%s\" but not allowed\n
    :T 运行"%s\"但不允许\n
# *** new message
!X_SIGNALING
    :E %s %s with signal %d return %d\n
    :T %s %s 有信号 %d 返回 %d\n
# *** new message
!E_MISSINFO
    :E Missing information about daemon or utility %s\nin configuration file %s\n
    :T 缺少(daemon)及公用程式资料%s\n关于配置文件 %s\n
# *** new message
!T_SCOPE
    :E Netconf scope
    :T 网络设定范围
      
# *** new message
!X_SETNISDOM
    :E Set NIS domain to %s\n
    :T 设定NIS域 %s\n
# *** new message
!E_UNKNOWNDAEMON
    :E Unknown daemon :%s:....\ndon't know how to support it\n
    :T 不明服务(daemon) :%s:.... \n不知怎样支持\n
# *** new message
!P_CHGDATE
    :E correct the date and time
    :T 改正日期和时间
# *** new message
!F_ZONE
    :E zone
    :T 区
# *** new message
!F_STORECMOS
    :E Store date in CMOS
    :T 日期存入 CMOS
# *** new message
!F_UNIVERSAL
    :E universal format(GMT)
    :T (GMT)模式
# *** new message
!F_GETDATE
    :E Get date from server(s)
    :T 从服务器取得日期
# *** new message
!T_TIME
    :E Time
    :T 时间
# *** new message
!F_HOUR
    :E Hour
    :T 时
# *** new message
!F_MINUTES
    :E Minutes
    :T 分钟
# *** new message
!F_SECONDS
    :E Seconds
    :T 秒
# *** new message
!T_DATE
    :E Date
    :T 日期
# *** new message
!F_YEAR
    :E Year
    :T 年
# *** new message
!F_MONTH
    :E Month
    :T 月
# *** new message
!F_DAYOFMONTH
    :E Day of month
    :T 日
# *** new message
!T_DATETIME
    :E Workstation date & time
    :T 工作站时间及日期
# *** new message
!I_DATETIME
    :E Fill this form to indicate how the workstation must\nget its date and time\n
    :T 这里指示工作站怎样\n获取时间及日期\n
# *** new message
!E_CANTPROBE
    :E Can't probe current setup of network device %s\n
      +No way to activate the network\n
    :T 不能测试网络设备%s 设定\n无法启动网络\n
# *** new message
!E_NODEVICE
    :E Networking was configured\n
      +for the interface %s\n
      +but this device is not configured\n
      +in the kernel\n
    :T 网络已设定为\n界面%s\n但这设备还未设定于\n核心中\n
# *** new message
!T_ROUTEHOSTS
    :E Route to other hosts
    :T 到另一主机的路径
# *** new message
!T_ROUTENET
    :E Route to other networks
    :T 到其他网络的路由
# *** new message
!I_TOADDROUTE
    :E Select [Add] to add a new route
    :T 选[新增]增加路由
# *** new message
!M_DEFROUTE
    :E Defaults
    :T 缺省
# *** new message
!M_ROUTENET
    :E other routes to networks
    :T 至网络的其他路径
# *** new message
!M_ROUTEHOSTS
    :E other routes to hosts
    :T 到主机的其他路径
# *** new message
!M_ROUTED
    :E the routed daemon
# *** new message
!M_SET
    :E Set
    :T 配置
# *** new message
!M_CONFIG
    :E Configure
    :T 设定
# *** new message
!T_ROUTES
    :E Routes to other networks
    :T 到另一网络的其他路径
# *** new message
!I_ROUTES
    :E If your network has access to other networks\n
      +you must tell how to reach those networks\n
      +For many setup, simply setting the default route\n
      +is good enough\n
      +\n
      +If you only talk to machines on the local network\n
      +then all this is not necessary.\n
    :T 如果你的网络和其他网络相连\n
      +请指示连接方法\n
      +如果你仅想在本地网络上通讯\n
      +\n
      +惠蛤セ呼隔筿福癸杠(talk)\n
      +这并不是必须的\n
# *** new message
!I_DEFGTW
    :E Enter the IP number of the main gateway\n
      +And indicate if this machine is allowed to\n
      +route IP packets
    :T 请输入网关的IP地址\n并请指示该主机是否可以\n路由IP包
# *** new message
!F_PRIMNAME
    :E Primary name + domain
    :T 主要名称和网域
# *** new message
!F_ALIASES
    :E Aliases (opt)
    :T 别名（可选）
# *** new message
!F_IPADR
    :E IP address
    :T IP 地址
# *** new message
!F_NETADR
    :E Network address (opt)
    :T 网络地址（可选）
# *** new message
!F_NETMASK
    :E Netmask (opt)
    :T 网络掩码（可选）
# *** new message
!E_NEEDIP
    :E Adaptor %d: Missing IP number
    :T %d 配接卡，没有IP 地址
# *** new message
!F_IVLDIP
    :E Invalid IP number: %s
    :T 无效IP地址%s
# *** new message
!F_IVLDNETIP
    :E Invalid network number:%s
    :T 无效网络地址 %s
# *** new message
!E_IVLMASK
    :E Invalid netwask: %s
    :T 无效网络掩码： %s
# *** new message
!Q_NOIP
    :E Are you sure
    :T 确定吗？
# *** new message
!I_NOIP
    :E No IP address was entered for the first\n
      +ethernet adaptor. Either it is a mistake\n
      +(you forgot) or you don't have a network\n
      +adaptor at all.\n
      +\n
      +If you don't have any network adaptor,\n
      +it is a good idea to enter the IP number\n
      +127.0.0.1, which correspond to a dummy\n
      +internal network. This may help later with\n
      +network aware application such as X11.\n
      +\n
      +Do you want me to enter 127.0.0.1 for you ?
    :T 第一块网卡的IP 地址没有\n
      +输入，可能你忘了输入\n
      +或你的机器根本没有网卡\n
      +\n
      +如果你没有网卡可以输入127.0.0.1\n
      +为IP 地址，这是一个虚拟IP 地址\n
      +这对一些网络应用程序是很有用的\n
      +\n
      +你是否需要输入127.0.0.1?
# *** new message
!T_THISHOST
    :E This host basic configuration
    :T 该主机的基本设定
# *** new message
!I_THISHOST
    :E You are allowed to control the parameters\n
      +which are specific to this host and related\n
      +to its main connection to the local network
    :T 你可以控制这台主机的参数及\n跟该主机相关的机器
# *** new message
!E_OUTOFMEMORY
    :E Out of memory\n
    :T 超出内存\n
# *** new message
!F_IPNUM
    :E IP number
    :T IP地址
# *** new message
!T_HOSTNETDEF
    :E host/network definition
    :T 主机/网络定义
# *** new message
!E_IVLIPNUM
    :E Invalid IP number
    :T 无效IP地址
# *** new message
!I_HOSTSDEF
    :E Select a host/network definition to modify
    :T 选一主机/网络 定义 修改
# *** new message
!I_ADDDEF
    :E Select [Add] to add a new definition
    :T 选[增加] 增加新定义
# *** new message
!F_FIRSTETH
    :E First ethernet adaptor
    :T 第一块网卡
# *** new message
!F_SECOND
    :E Second
    :T 第二
# *** new message
!F_THIRD
    :E Third
    :T 第三
# *** new message
!F_FOURTH
    :E Fourth
    :T 第四
# *** new message
!F_FIRSTSLIP
    :E First SLIP/CSLIP channel
    :T 材 SLIP/CSLIP 恨笵
# *** new message
!F_FIRSTPPP
    :E First PPP channel
    :T 第一个PPP管道
# *** new message
!E_IVLDNETLEVEL
    :E File %s\n
      +contains an invalid netconf level: %d\n
      +It must be 0, 1 or 2.\n
      +Just run \"netconf --runlevel\" with an\n
      +explicit value (local, client, or server)\n
      +to fix this.\n
      +\n
      +Assuming \"local\" configuration for now.\n
    :T %s 文件\n
      +含有无效的netconf 级别: %d\n
      +一定是 0,1 ┪ 2\n
      +请将 \"netconf --runlevel\" 再加上\n
      +显示值(local, client ┪ server)\n
      +作改正\n
      +\n
      +现假设"\local\" 设定\n
# *** new message
!E_CANTOPEN
    :E Can't open file %s\n(%s)\n
    :T 不能打开文件\n(%s)\n
# *** new message
!P_PERMUPDATE
    :E update the status of the system
    :T 更新系统状态
# *** new message
!X_LIST
    :E List of things required to activate current configuration\n
    :T 启动目前设定所需\n
# *** new message
!M_INFOR
    :E Basic host information
    :T 基本主机信息
# *** new message
!M_HOSTS
    :E Information about other hosts
    :T 其他主机信息
# *** new message
!M_NETWORKS
    :E Information about other networks
    :T 其他网络信息
# *** new message
!M_ROUTING
    :E Routing and gateways
    :T 路由和网管
# *** new message
!M_RESOLV
    :E Name server specification (DNS)
    :T 名称服务器 (DNS)
# *** new message
!M_NIS
    :E Network Information System (NIS)
    :T 网络信息系统 (NIS)
# *** new message
!M_ORDER
    :E Host name search path
    :T 主机搜寻路径
# *** new message
!M_EXPORTS
    :E Exported file systems (NFS)
    :T 外挂文件系统 (NFS)
# *** new message
!M_ISOL
    :E Isolated/simple network from scratch
    :T 隔离/简单 网络
# *** new message
!T_CLIENTTASKS
    :E Client tasks
    :T 客户任务
# *** new message
!T_SERVER
    :E Server tasks
    :T 服务任务
# *** new message
!T_BOOT
    :E Boot services
    :T 启动服务
# *** new message
!T_FIREWALL
    :E Firewalling
    :T 防火墙
# *** new message
!T_NETWORK
    :E Network configurator
    :T 网络设定
# *** new message
!I_NETWORK
    :E This package allows you to configure a\n
      +TCP/IP network from scratch using ethernet\n
      +and modem (or other serial connection)
    :T 该套件可以帮你由基本开始\n
      +设定 TCP/IP 网络---Ethernet\n
      +及MODEM (或其他串联方法)\n
      +均可)
# *** new message
!E_NETCONF
    :E Netconf: Invalid arguments\n
    :T Netconf: 无效参数\n
# *** new message
!E_NETCONFDEF
    :E `netconf' without an argument starts the interactive mode\n
    :T `netconf` 缺少参数开始交谈模式\n
# *** new message
!E_IVLRUNLEVEL
    :E Invalid runlevel %s for network daemons\n
      +Values 1,2,3,4,5,6 or local,client,server\n
      +are valid.\n
    :T 无效 %s runlevel (给网络服务)\n
      +只有 1,2,3,4,5,6 或 local,client,server\n
      +才有效\n
# *** new message
!E_NISSERV
    :E Unknown NIS server %s\n
    :T 不明NIS 服务 %s\n
# *** new message
!F_NISDOM
    :E NIS domain
    :T NIS 域
# *** new message
!F_NISSERV
    :E NIS server
    :T NIS 服务
# *** new message
!T_NISCONF
    :E NIS client configuration
    :T NIS 客户设定
# *** new message
!I_NISCONF
    :E You must enter the NIS domain\n
      +A server must be specified\n
      +if it can't be probed by a broadcast\n
      +The server is either specified as an IP number\n
      +or as a name.\n
    :T 你必须输入NIS网域\n
      +如果由广播不能获取资料\n
      +请指明服务器\n
      +服务器可以定位 IP 地址\n
      +或名称\n
# *** new message
!P_SETTINGNIS
    :E Setting the NIS domain name
    :T NIS 网域名称配置
# *** new message
!E_USAGEDOM
    :E usage: domainname [ nisdomain ]\n
    :T 用法: domainname [ nisdomain ]\n
# *** new message
!F_ROUTEDREQ
    :E routed is required
    :T 需要路径
# *** new message
!F_NOEXPORT
    :E Does not export any routes (Silent)
    :T 不要输出任何路径(Silent)
# *** new message
!F_EXPORTDEFRT
    :E Export your default route
    :T 输出缺省路径
# *** new message
!T_ROUTEDCONF
    :E Routed daemon configuration
    :T 服务(daemon)路由设定
# *** new message
!I_ROUTEDCONF
    :E Check the appropriate options\n
      +unless you have a simple network, routed\n
      +is required.\n
    :T 检测合适的选项\n除非你有一个简单的网络，路由是必须的\n
# *** new message
!E_CANTSILENT
    :E Can't be both silent and a gateway\n
    :T silent 和网关不能共存\n
# *** new message
!E_IVLDEST
    :E Invalid destination %s for line %d in file %s\n%s\n
    :T 无效目的地%s (在 第%d 行) 文件%s\n%s\n
# *** new message
!E_NOKEYGW
    :E Keyword gw missing from line %d of file %s\n%s
    :T 缺少关键字gw (在第 %d 行) 文件 %s\n%s
# *** new message
!E_IVLGTW
    :E Invalid gateway %s for line %d in file %s\n%s\n
    :T 无效网关 %s (在第 %d 行）文件 %s\n%s\n
# *** new message
!E_NETMASK
    :E Keyword netmask expected, on line %d of file %s\n%s
    :T 需要关键字 netmask (在第 %d 行)文件 %s\n%s
# *** new message
!E_IVLOUTPUT
    :E Invalid content in /proc/net/route\n%s\n
    :T 无效内容 /proc/net/route\n%s\n
# *** new message
!F_GATEWAY
    :E Gateway
    :T 网关
# *** new message
!F_DEST
    :E Destination
    :T 目的地
# *** new message
!T_ROUTESPEC
    :E route specification
    :T 路由规格
# *** new message
!I_ROUTESPEC
    :E Enter either IP number or name\n
    :T 输入 IP 地址或名称\n
# *** new message
!I_SIMPLEINST
    :E This option allows you to install\n
      +a complete network setup, including the names\n
      +of all machine.\n
      +\n
      +This will overwrite the following files:\n
      +      %s\n
      +      %s\n
    :T 这选项帮你安装\n
      +一个完整网络设定--包括所有机器的\n
      +名称\n
      +\n
      +这会覆盖以下文件:\n
      +    %s\n
      +    %s\n
# *** new message
!Q_SIMPLEINST
    :E Installing network from scratch
    :T 由基本开始安装网络
# *** new message
!DUMMY_NAME_SERV
    :E linux-serv
# *** new message
!DUMMY_NAME_BANANA
    :E banana
# *** new message
!DUMMY_NAME_APPLE
    :E apple
# *** new message
!DUMMY_NAME_CHERRY
    :E cherry
# *** new message
!DUMMY_NAME_ORANGE
    :E orange
# *** new message
!DUMMY_NAME_WOLF
    :E wolf
# *** new message
!DUMMY_NAME_LION
    :E lion
# *** new message
!DUMMY_NAME_MOUSE
    :E mouse
# *** new message
!DUMMY_NAME_EAGLE
    :E eagle
# *** new message
!DUMMY_NAME_COBRA
    :E cobra
# *** new message
!DUMMY_NAME_ELVIS
    :E elvis
# *** new message
!DUMMY_NAME_BABE
    :E babe
# *** new message
!DUMMY_NAME_ALNOLD
    :E arnold
# *** new message
!DUMMY_NAME_ROCKY
    :E rocky
# *** new message
!DUMMY_NAME_BOND
    :E bond
# *** new message
!DUMMY_NAME_RINGO
    :E ringo
# *** new message
!DUMMY_NAME_PAUL
    :E paul
# *** new message
!DUMMY_NAME_JOHN
    :E john
# *** new message
!DUMMY_NAME_GEORGE
    :E george
# *** new message
!DUMMY_NAME_MADONA
    :E madona
# *** new message
!DUMMY_NAME_TARZAN
    :E tarzan
# *** new message
!DUMMY_NAME_LINUS
    :E linus
# *** new message
!DUMMY_NAME_CANADA
    :E canada
# *** new message
!DUMMY_NAME_USA
    :E usa
# *** new message
!DUMMY_NAME_FINLAND
    :E finland
# *** new message
!DUMMY_NAME_FRANCE
    :E france
# *** new message
!T_YOURMACHINE
    :E Your machine name
    :T 机器名称
# *** new message
!I_YOURMACHINE
    :E You must select a name for your machine\n
      +out of this list. Each of your co-networker\n
      +must select a different name\n
    :T 你一定要选者这列表中没有的名称\n其他网管员必须选者另一名称\n
# *** new message
!M_ACTIVATE
    :E Activate the changes
    :T 启动改变
# *** new message
!M_PREVIEW
    :E Preview what has to be done
    :T 预检改变
# *** new message
!T_STATUS
    :E Status of the system
    :T 系统状况
# *** new message
!I_STATUS
    :E The state of the system is not\n
      +in sync with the current/updated\n
      +configuration. You are allowed to\n
      +make it current, or continue with\n
      +the current configuration. You can also\n
      +look at the things that will have to be done\n
      +to make the system current.\n
    :T 这系统的状态跟目前/更新\n
      +的状态不同步，你可以选\n
      +目前或进行目前的设定.你也可以检查一切\n
      +令你达到目前的设定工做\n
# *** new message
!T_THINGSTODO
    :E Things to do
    :T 要做的工作
# *** new message
!X_WOULDHAVE
    :E Would have %s %s\n
    :T 需要 %s %s\n
# *** new message
!X_STOPPED
    :E stopped
    :T 停止
# *** new message
!E_IVLBASIC
    :E Invalid basic configuration of the host\n%s\n
    :T 无效主机的基本设定\n%s\n
# *** new message
!E_NOPRIMNAME
    :E No definition for the primary name\n
      +in /etc/hosts.\n
      +There is no entry with the name or alias\n
      +\"loghost\".\n
    :T 没有主名称的定义\n在 /etc/hosts.\n没有输入名称或别名\\"loghost\".\n
# *** new message
!P_SETHOSTNAME
    :E Setting the hostname
    :T 设定主机名
# *** new message
!X_SETHOSTNAME
    :E Setting hostname to %s\n
    :T 设定主机名称为%s\n
# *** new message
!E_CANTSETHOST
    :E Can't set the host name to %s\n(%s)\n
    :T 不能设定主机名称为 %s\n(%s)\n
# *** new message
!E_NOTKNOWN
    :E %s is not known\n
    :T 不明 %s\n
# *** new message
!E_HOSTUSAGE
    :E usage: hostname [-f] [ host name ]\n
      +       hostname -d\n
      +       hostname --domain\n
    :T 用法: hostname [-f] [ host name ]\n      hostname -d\n      hostname --domain\n
# *** new message
!X_STARTED
    :E started
    :T 启动
# *** new message
!E_DNSDOMUSAGE
    :E usage: dnsdomainname\n(No argument)\n
    :T 用法: dnsdomainname\n(没有参数)\n
# *** new message
!E_UNKHOST
    :E Unknown host name
    :T 不明主机名称
# *** new message
!E_NOALIAS
    :E No kernel support for devices aliasing
    :T 核心不支持设备别名
# *** new message
!E_SETALIAS
    :E Invalid alias setup for device %s\n%s
    :T 无效设备别名设定 %s\n%s
# *** new message
!M_ALIAS
    :E IP aliases for virtual hosts
    :T 虚拟主机 IP 别名
# *** new message
!F_IPALIASES
    :E IP alias or range
    :T IP 别名及范围
# *** new message
!T_IPALIASFORDEV
    :E IP aliases for device %s
    :T 社别 %s IP 别名
# *** new message
!I_IPALIASFORDEV
    :E You can enter alternative IP numbers for a\n
      +network interface. You can enter several numbers\n
      +per lines. Many time savers syntax are supported\n
      +Here are some examples for:\n
      +    192.168.1.10 192.168.1.11 192.168.1.12\n
      +    192.168.1.10-12\n
      +    10-12
    :T 你可以输入另外的IP 地址给\n
      +一块网卡， 你可以每一行输入\n
      +几个数字，简写亦可\n
      +例如：\n
      +    192.168.1.10 192.168.1.11 192.168.1.12\n
      +    192.168.1.10-12\n
      +    10-12
# *** new message
!T_IPALIASES
    :E Edit IP aliases configurations
    :T 编辑 IP 别名配置
# *** new message
!I_SYSTEMS
    :E Each network device may have several\n
      +IP number. Alternate ones are called alias and are\n
      +entered here.\n
    :T 每个网络设备可以有多个\nIP 地址，其他地址是别名，可以再此\n输入。\n
# *** new message
!P_UPDALIAS
    :E to update IP aliases
    :T 更新IP 别名
# *** new message
!F_DAEPATH
    :E path of the command
    :T 命令路径
# *** new message
!T_DAECONFIG
    :E Daemons and command config
    :T 服务(Daemons)及命令设定
# *** new message
!I_DAECONFIG
    :E You are allowed to changed the way\na daemon or command is invoked.
    :T 你可以转变服务、命令启动方法
# *** new message
!F_DAEARGS
    :E arguments
    :T 参数
# *** new message
!E_IPXFORMAT
    :E Invalid format of file %s\nCan't manage IPX properly\n
    :T 无效%s 文件模式\n不能正确地管理 IPX\n
# *** new message
!F_IPXAUTOCONFIG
    :E Autoconfigure
    :T 自动设定
# *** new message
!F_PRIMARY
    :E primary
    :T 初级
# *** new message
!F_ISPRIMARY
    :E is the primary interface
    :T 初级接口
# *** new message
!T_IPXCONF
    :E IPX interface configuration
    :T IPX 接口配置
# *** new message
!I_IPXCONF
    :E You must associate a frame type with\n
      +a network devices and a network number\n
      +For one device, it is possible to have several\n
      +combination of frame and network number.\n
      +Most linux client machine (IPX client) will be happy\n
      +by selecting the \"autoconfigure\" choices.
    :T 你需要将网络介面连至一贞类型\n
      +加上网络地址\n
      +一个设备可以有几个框贞类型和网络\n
      +组合，大部分 linux 客户端(IPX 客户端)对自动设定\n
      +是欢迎的
# *** new message
!M_IPXCONF
    :E IPX interface setup
    :T IPX 接口安装
# *** new message
!F_FRAMETYPES
    :E interfaces frame types
    :T 接口贞类型
# *** new message
!F_FRAMETYPE
    :E Frame type
    :T 贞类型
# *** new message
!T_IPXINTERNAL
    :E Internal net
    :T 内部网
# *** new message
!F_IPXENABLE
    :E Enable
    :T 使能
# *** new message
!F_IPXNETWORK
    :E IPX networking
    :T IPX 网络
# *** new message
!E_IPXSOCKET
    :E Can't open IPX control socket\n
      +Looks ODD to me.\n
      +Maybe linuxconf is incompatible with the kernel release
    :T 不能打开IPX套接字\n
     
# *** new message
!F_NETWORKHOST
    :E network or host
    :T 网络或主机
# *** new message
!F_NETMASKOPT
    :E netmask(opt)
    :T 网络掩码（可选）
# *** new message
!F_EMPTYSLOT
    :E Select [Add] to add empty slots at the end of the dialog
    :T 在对话框进行增加选[增加]
# *** new message
!T_HTMLACCESS
    :E Linuxconf html access control
    :T Linuxconf html 许可控制
# *** new message
!M_HTMLACCES
    :E Linuxconf network access
    :T Linuxconf 网络许可
# *** new message
!E_IVLDHOSTNET
    :E invalid host or network: %s\n
    :T 无效网络或主机%s\n
# *** new message
!E_IVLDMASK
    :E invalid netmask: %s\n
    :T 无效网络掩码%s\n
# *** new message
!F_LOCALMODE
    :E No network
    :T 不存在该网络
# *** new message
!F_CLIENTMODE
    :E Client mode
    :T 客户模式
# *** new message
!F_SERVERMODE
    :E Server
    :T 服务
# *** new message
!T_NETRUNLEVEL
    :E Network operation mode
    :T 网络操作模式
# *** new message
!I_NETRUNLEVEL
    :E 
# *** new message
!E_NETRUNLEVEL
    :E Change network operation mode
    :T 改变网络操作模式
# *** new message
!E_IPNOMATCH
    :E IP %s do not match %s/%s
    :T IP %s 不匹配%s/%s
# *** new message
!T_MAINACCESS
    :E 0-May use linuxconf
    :T 0-可用linuxconf
# *** new message
!T_PSYSCONTROL
    :E 0-General system control
    :T 0-系统控制
# *** new message
!P_MAINACCESS
    :E access linuxconf
    :T 许可linuxconf
# *** new message
!F_BCAST
    :E Broadcast (opt)
    :T 广播（可选）
# *** new message
!E_NETMASKNEEDED
    :E A netmask is needed for interface %s\n
      +because you have supplied a network number
    :T 介面%s需要网络掩码\n因为你提供了网络地址
# *** new message
!E_IVLIPINTER
    :E Invalid IP configuration for interface %s\n
      +IP address\t%s\t%s\n
      +Net address\t%s\t%s\n
      +Netmask\t%s\t%s\n
      +Broadcast\t%s\t%s\n
    :T 介面%s有无效IP设定\n
      +IP 地址\t%s\t\%s\n
      +网络地址\t%s\t%s\n
      +网络掩码\t%s\t%s\n
      +广播地址\t%s\t%s\n
# *** new message
!E_TOOLONG
    :E The command takes more than %d seconds to execute, odd\n
    :T 这命令需要多过%d 秒,奇怪\n
# *** new message
!F_MANAGED
    :E Managed
    :T 管理
# *** new message
!I_MANAGED
    :E Linuxconf may operate it
    :T Linuxconf可运行
# *** new message
!F_SKIP
    :E Skip
    :T 跳跃
# *** new message
!F_ABORT
    :E Abort
    :T 放弃
# *** new message
!I_ABORT
    :E this session
    :T 这区
# *** new message
!I_KILLCMD
    :E this command
    :T 命令
# *** new message
!I_CMDTIMEOUT
    :E The command\n
      +\n
      +%s\n
      +\n
      +is taking longer than expected to complete\n
      +Please take action
    :T 该命令\n\n%s\n\n需要较长时间完成\n请做适合动作
# *** new message
!T_CMDTIMEOUT
    :E Too long
    :T 太长
# *** new message
!I_SKIP
    :E this command
    :T 该命令
# *** new message
!F_KILLCMD
    :E Kill
    :T 取消
# *** new message
!E_KILLED
    :E killed by operator
    :T 操作员取消
# *** new message
!B_CONFIG
    :E Config
    :T 控制
# *** new message
!S_CROND
    :E Cron daemon
    :T Cron DAEMON
# *** new message
!S_MOUNTALL
    :E Mounting local volumes
    :T 挂入本机卷
# *** new message
!S_FIXPERM
    :E Checking files permissions
    :T 查看文件许可
# *** new message
!S_LOOPBACK
    :E Setting network loopback
    :T 设定网络回路
# *** new message
!S_PORTMAP
    :E Starting the RPC portmapper
    :T 开始 RPC portmapper
# *** new message
!S_INETD
    :E Starting inetd
    :T 开始inetd
# *** new message
!S_LILO
    :E Checking LILO
    :T 查看 LILO
# *** new message
!S_ALIASLOOP
    :E Setting IP aliases on network loopback
    :T 设定网络回路 IP 
# *** new message
!S_RETURN
    :E return %d\n
    :T 返回%d\n
# *** new message
!S_SECTBASE
    :E Checking base configuration
    :T 查看基本设定
# *** new message
!S_KMODULES
    :E Checking kernel's modules
    :T 查看核心模块
# *** new message
!S_SYSLOG
    :E Starting system loggers
    :T 开始系统日志
# *** new message
!S_PRTSPOOL
    :E Starting printer spooler
    :T 开始打印排队
# *** new message
!S_SECTCLIENT
    :E Setting client networking
    :T 设定客户网络
# *** new message
!S_IPDEVICES
    :E Configure network IP devices
    :T 设定网络设备
# *** new message
!S_IPXDEVICES
    :E Configure network IPX devices
    :T 设定IPX
# *** new message
!S_IPROUTES
    :E Configure IP routes
    :T 设定IP 路由
# *** new message
!S_ROUTEDS
    :E Start routing daemons
    :T 开始路由服务
# *** new message
!S_NIS
    :E Starting NIS
    :T 开始NIS
# *** new message
!S_AMD
    :E Starting automounter
    :T 开始自动绑定
# *** new message
!S_SECTSERVER
    :E Setting server networking
    :T 设定服务网络
# *** new message
!S_ALIAS
    :E Setting IP aliases on net devices
    :T 设定IP 别名和 IP 网络设备
# *** new message
!S_NFS
    :E Starting NFS service
    :T 开始NIS服务
# *** new message
!S_UNSETSERVER
    :E Unsetting server networking
    :T 不设定服务网络
# *** new message
!S_STOPNFS
    :E Stopping NFS service
    :T 停止NFS
# *** new message
!S_UNSETCLIENT
    :E Unsetting networking
    :T 不设定网络
# *** new message
!S_KSENDMAIL
    :E Stopping sendmail
    :T 停止sendmail
# *** new message
!S_KROUTEDS
    :E Stopping routing daemons
    :T 关闭路由
# *** new message
!S_KAMD
    :E Stopping automounter
    :T 停止自动挂上
# *** new message
!S_MOUNTNET
    :E Mounting network volumes
    :T 挂上网络卷
# *** new message
!T_CONFIGLOG
    :E Configuration log
    :T 日志配置
# *** new message
!I_CONFIGLOG
    :E These logs shows all configuration commands\nissued by linuxconf
    :T 这记录列出所有由 linuxconf\n发出的设定命令
# *** new message
!E_LEFTBG
    :E Left running in the background
    :T 在后台运行
# *** new message
!Q_SEELOGS
    :E Some errors were reported\nDo you want to examine the logs
    :T 发生错误\n你是否需要检查日志
# *** new message
!Q_SOMEERRORS
    :E There were some errors
    :T 存在错误
# *** new message
!I_PREBOOT
    :E Tasks before booting
    :T 启动前的工作
# *** new message
!I_BOOTING
    :E Booting
    :T 启动
# *** new message
!I_FIXPERM
    :E Fixperm session
    :T Fixperm 区
# *** new message
!I_UPDATE
    :E Activating changes
    :T 启动改变
# *** new message
!I_RUNLEVEL
    :E Switching runlevel
    :T 转换 runlevel
# *** new message
!I_PPPPOSTCON
    :E PPP postconnect commands
    :T PPP 连线后命令
# *** new message
!E_PIDFILE
    :E Invalid PID file: %s
    :T 无效 PID 文件%s
# *** new message
!I_LOGACCESS
    :E in %s
    :T 在%s
# *** new message
!F_LOGACCESS
    :E Log access
    :T 记录存取
# *** new message
!E_DAEUNKNOWN
    :E Unknown command or daemon %s
    :T 不明命令或服务%s
# *** new message
!I_MISSCMPN
    :E Linuxconf can't locate the command %s\n
      +on your system.\n
      +\n
      +The command is either missing (not installed)\n
      +or installed with a different name or path\n
      +\n
      +Do you want to change the configuration for this command ?
    :T Linuxconf тぃ㏑ %s\n
      +\n
      +可能缺少该命令(没有安装)\n
      +或安装路径不对\n
      +\n
      +你是否更改该命令的设定?
# *** new message
!Q_MISSCMPN
    :E Missing component ?
    :T 缺少组件?
# *** new message
!F_PKGNAME
    :E Package's name
    :T 套件名称
# *** new message
!F_PKGSTART
    :E Start command
    :T 启动命令
# *** new message
!F_PKGSTOP
    :E Stop command
    :T 停止命令
# *** new message
!F_PKGRELOAD
    :E Reload command
    :T 重载命令
# *** new message
!F_PKGMODULE
    :E Module name or path
    :T 模组名称或路径
# *** new message
!F_PIDFILE
    :E PID files
    :T PID 文件
# *** new message
!T_ACTIVATION
    :E Activation control
    :T 启动控制
# *** new message
!F_STARTAFTER
    :E Start after package
    :T 封包后启动
# *** new message
!F_STARTLEVEL
    :E Start at runlevel
    :T 开始在runlevel
# *** new message
!F_LOCAL
    :E No networking
    :T 没有网络
# *** new message
!F_CLIENT
    :E Client networking
    :T 客户网络
# *** new message
!F_SERVER
    :E Server networking
    :T 服务器网络
# *** new message
!F_PKGCONFIG
    :E Config files
    :T 配置文件
# *** new message
!F_PKGCOMMENTS
    :E Comments
    :T 备注
# *** new message
!T_DROPCONF
    :E Dropin configuration
    :T Dropin 设定
# *** new message
!I_DROPCONF
    :E You can control how Linuxconf will manage\n
      +a given package, when it will start, stop, and reload/restart\n
      +and how and why\n
    :T 你可以控制 Linuxconf 怎样管理\n
      +一个套件, 何时启动、停止、重载、重新启动\n
      +也可告诉这些套件怎样、为何\n
# *** new message
!F_STOPLEVEL
    :E Stop at runlevel
    :T 停止的runlevel
# *** new message
!F_PKGDESC
    :E Package's description
    :T 套件说明
# *** new message
!I_ADDDROPIN
    :E Select [Add] to add a new dropin definition
    :T 选[新增]增加一项新的 dropin 定义
# *** new message
!T_DROPINMNG
    :E Dropin management
    :T Dropin 管理
# *** new message
!I_DROPINMNG
    :E You are allowed to modify, delete and\n
      +add new dropins. Dropins provide information\n
      +letting information control and manage add-on package
    :T 你可以更改、删除及\n
      +新增 dropins. Dropins 可以提供资料\n
      +亦可作为资料管理和附件管理
# *** new message
!F_PROCNAME
    :E Process names
    :T 作业名称
# *** new message
!T_STARTSYS
    :E Starting %s
    :T 启动%s
# *** new message
!T_STOPSYS
    :E Stopping %s
    :T 停止%s
# *** new message
!F_NORELOAD
    :E No reload/restart needed
    :T 不可重载/需要重启动
# *** new message
!F_REVISION
    :E Dropin revision
    :T Dropin 修正
# *** new message
!E_CMDMISS
    :E Command %s missing\n
    :T 缺少命令%s\n
# *** new message
!F_DONTSTOP
    :E Never stop
    :T 永不停止
# *** new message
!T_ACTNEW
    :E Activate new service
    :T 启动新服务
# *** new message
!I_ACTNEW
    :E The service %s has been added to your system\n
      +   (%s)\n
      +Do you want to enable it ?
    :T 服务 %s 已经加入系统\n   (%s)\n你想启动吗？
# *** new message
!O_ENABLED
    :E Enabled
    :T 启动
# *** new message
!O_TMPDIS
    :E Temp-disabled
    :T 暂时停用
# *** new message
!O_DISABLED
    :E Disabled
    :T 停用
# *** new message
!T_SERVICECTL
    :E Service control
    :T 服务控制
# *** new message
!I_REENABLE
    :E Re-enabling service %s\n
    :T 从新启动服务%s\n
# *** new message
!P_DELDROP
    :E to delete a dropin
    :T 删除dropin
# *** new message
!T_ROUTEALT
    :E Route to alternate local networks
    :T 到另一本地网络的路由
# *** new message
!M_ROUTEALT
    :E routes to alternate local nets
    :T 到另一本地网的路由
# *** new message
!I_PPPDIALD
    :E PPP diald setup commands
    :T PPP diald 拨号命令
# *** new message
!T_ADAPTOR
    :E Adaptor
    :T 介面卡
# *** new message
!F_CONFIG
    :E Config
    :T 设定
# *** new message
!H_SERVICEMODE
    :E Enabled\tTemp-disabled\tDisabled
    :T 启动\t暂时停用\t停止使用
# *** new message
!T_NETMISC
    :E Misc
    :T 其他
# *** new message
!T_CROND
    :E Scheduled tasks daemon
    :T 定时工作任务
# *** new message
!T_ALIASES
    :E IP aliases
    :T IP 别名
# *** new message
!T_PORTMAP
    :E Port mapper
# *** new message
!T_INETD
    :E Inetd server
    :T Inetd 服务
# *** new message
!T_SYSLOG
    :E system logger
    :T 系统日志
# *** new message
!T_KLOGD
    :E Kernel logger
    :T 核心日志
# *** new message
!T_LPD
    :E Printer spooler
    :T 打印排队
# *** new message
!T_ROUTED
    :E Routed dynamic router
    :T 路由动态路由器
# *** new message
!T_GATED
    :E Gated dynamic router
    :T 网关动态路由器
# *** new message
!T_YPBIND
    :E NIS client
    :T NIS 客户
# *** new message
!T_AMD
    :E Auto-mounter
    :T 自动挂入
# *** new message
!T_NFS
    :E NFS server
    :T NFS 服务
# *** new message
!T_RARP
    :E RARP service
    :T RARP 服务
# *** new message
!T_FIREWALLING
    :E Firewalling
    :T 防火墙
# *** new message
!T_KERNELD
    :E Kernel's modules manager
    :T 核心模块管理
# *** new message
!T_NETWORKING
    :E NETWORKING
    :T 网络
# *** new message
!H_ROUTENET
    :E Network\tNetmask\tGateway
    :T 网络\t网络掩码\t网关
# *** new message
!H_ROUTEHOST
    :E Host\tGateway
    :T 主机\t网关
# *** new message
!H_ROUTEALT
    :E Network\tNetmask\tInterface
    :T 网络\t网络掩码\t介面
# *** new message
!E_OK
    :E Ok
    :T 确定
# *** new message
!E_INV
    :E Invalid
    :T 无效
# *** new message
!F_NETDEV
    :E Net device
    :T 网络设备
# *** new message
!F_MODULE
    :E Kernel module
    :T 核心模块
# *** new message
!F_MODIO
    :E I/O port (opt)
    :T I/O 端口(可选)
# *** new message
!F_MODIRQ
    :E Irq (opt)
    :T Irq (可选)
# *** new message
!F_ARCNET
    :E Arcnet adaptor
    :T Arcnet 界面
# *** new message
!F_ATPNET
    :E Pocket adaptor
    :T Pocket 界面
# *** new message
!F_FIRSTTKR
    :E First Token ring adaptor
    :T 第一个 Token ring 界面ざ
# *** new message
!F_FIRSTDUM
    :E First dummy device
    :T 第一虚拟设备
# *** new message
!I_CLASS_A
    :E Class A network
    :T Class A 网络
# *** new message
!I_CLASS_B
    :E Class B network
    :T Class B 网络
# *** new message
!I_CLASS_C
    :E Class C network
    :T Class C 网络
# *** new message
!I_SUBNET128
    :E 25 bits sub-network
    :T 25 bits 子网
# *** new message
!I_SUBNET192
    :E 26 bits sub-network
    :T 26 bits 子网
# *** new message
!I_SUBNET224
    :E 27 bits sub-network
    :T 27 bits 子网
# *** new message
!I_SUBNET240
    :E 28 bits sub-network
    :T 28 bits 子网
# *** new message
!I_SUBNET248
    :E 29 bits sub-network
    :T 29 bits 子网
# *** new message
!E_RANGESYN
    :E Invalid range syntax
    :T 无效语法范围
# *** new message
!T_EXECSYSV
    :E Executing some Sysv init scripts
    :T 执行某些 Sysv init scripts
# *** new message
!T_LATEOUTPUT
    :E Grabbing some late messages from command %s\n
    :T 有命令%s 的到一些延迟信息
# *** new message
!F_BOOTCMD
    :E Boot time cleanup
    :T 起机时清洗
# *** new message
!T_BOOTDROPIN
    :E Dropin's boot time commands\n
    :T Dropin 起机命令\n
# *** new message
!M_DONTQUIT
    :E Don't quit
    :T 不退出
# *** new message
!E_SETETH0DEF
    :E netconf --setdevdef can only be used by root\n
    :T netconf --setdevdef 只可由 root 运行\n
# *** new message
!E_SETGATEWAY
    :E netconf --setgateway can only be used by root\n
    :T netconf --setgateway 只可由 root 运行\n
# *** new message
!E_SETCLOCKMODE
    :E netconf --setclockmode can only be used by root\n
    :T netconf --setclockmode 只可由root 运行\n
# *** new message
!I_NEWMAXALIASES
    :E Raising kernel max aliases per device limit to %d\n
    :T 增加核心最大别名数（每设备）为%d\n
# *** new message
!E_TOOALIASES
    :E Too many IP aliases, maximum %d
    :T 太多IP别名，最大%d
# *** new message
!I_RESETFORNEW
    :E Unsetting aliases to grow the kernel table from %d to %d entries\n
    :T 重设核心表别名由%d 增至%d 个\n
# *** new message
!E_BOOTRC
    :E netconf --bootrc path [ path ]
# *** new message
!F_MODINST
    :E (inst)
# *** new message
!E_DRPNOMODPATH
    :E Module %s not found for dropin %s
    :T 模组%s 找不到(dropin %s)
# *** new message
!I_ARCHIVE
    :E Configuration archiving
    :T 设定归档
# *** new message
!I_EXTRACT
    :E Configuration extraction
    :T 设定文档提取
# *** new message
!I_SWITCHCONF
    :E Switching configuration
    :T 转换设定
# *** new message
!N_FILEFUTURE
    :E The file %s as a revision date in the future\n
      +This probably means that you system time is wrong\n
      +or as been wrong at some point.
    :T 文件%s 的更新日期是一个将来日期\n这说明你的系统时间有误\n或某些错误
# *** new message
!M_SERVICESACT
    :E Services activity
    :T 服务活动
# *** new message
!I_MANUAL
    :E Manual
    :T 手动
# *** new message
!I_DHCP
    :E Dhcp
# *** new message
!I_BOOTP
    :E Bootp
# *** new message
!F_CONFMODE
    :E Config mode
    :T 配置模式
# *** new message
!I_PCMCIA
    :E PCMCIA device (removable)
    :T PCMCIA 设备(可以)
# *** new message
!P_INITNET
    :E Intialising the network
    :T 启始网络
# *** new message
!I_PUBLISH
    :E Publish an admin tree
    :T 公布admin树
# *** new message
!I_IMPORT
    :E Import an admin group
    :T 输入admin 组
# *** new message
!I_SETGATEWAY
    :E Changing default gateway to %s\n
    :T 改变缺省网关为%s\n
# *** new message
!X_CONFIG
    :E Config
    :T 设定
# *** new message
!I_KILLING
    :E Killing
    :T 取消
# *** new message
!E_MISSINGPRC
    :E Some process missing, full restart of package %s required\n
    :T 丢失了一些进程，需要重新启动包%s\n
# *** new message
!F_AUTORELOAD
    :E Autoreloaded
    :T 自动重载
# *** new message
!F_PKGPROBE
    :E Probe command
    :T 测试命令
# *** new message
!I_CREATEUSER
    :E Creating user account
    :T 创建用户
# *** new message
!I_DELETEUSER
    :E Deleting user account
    :T 删除用户
# *** new message
!I_ADAPACTIVE
    :E Enabled
    :T 使能
# *** new message
!E_SERVICE
    :E Unknown service %s\n
    :T 非法服务%s\n
# *** new message
!I_ROUTERON
    :E Enabling routing\n
    :T 使能路由\n
# *** new message
!I_ROUTEROFF
    :E Disabling routing\n
    :T 使能路由\n
# *** new message
!E_ROUTINGCTRL
    :E Can't controlling routing with this kernel
    :T 该核心不能控制路由
# *** new message
!F_DEFGTW
    :E Default gateway
    :T 缺省网关
# *** new message
!T_DEFAULTS
    :E Defaults
    :T 缺省
# *** new message
!I_ISROUTER
    :E Enable routing
    :T 使能路由
# *** new message
!E_NOHOSTNAME
    :E Host name not defined
    :T 主机名未定义
# *** new message
!E_TOOMSEARCH
    :E Too many entries in search statement\nin file %s
    :T 描述文件%s\n有很多入口
# *** new message
!E_IVLDLINE
    :E Invalid line %d in %s
    :T 无效行%d 在( %s)
# *** new message
!E_TOOMANYSERVERS
    :E Too many nameservers defined in %s\n
      +maximum 3\n
      +\n
      +If you edit and save, you will loose some entries\n
      +This is not only a limit of linuxconf\n
      +but a limit of the system in general\n
      +See \"man 5 resolver\"
    :T 太多名称服务器定义了（在 %s)\n
      +最多3个\n
      +\n
      +如果你编辑及储存,你将损失一些项目\n
      +这不仅是linuxconf 限制\n
      +也是一般系统的限制\n
      +参照\"man 5 resolver\"
# *** new message
!F_DNSNEEDED
    :E DNS usage
    :T DNS 语法
# *** new message
!M_DNSNEEDED
    :E DNS is required for normal operation
    :T 正常运行下需要DNS
# *** new message
!F_DEFDOM
    :E default domain
    :T 缺省域
# *** new message
!F_SEARCHDOM
    :E search domain %d (opt)
    :T 寻找域%d (可选)
# *** new message
!T_RESOLVCONF
    :E Resolver configuration
    :T 解析器设定
# *** new message
!I_RESOLVCONF
    :E You can specify which name server will be used\n
      +to resolv host ip number. Using the DNS is\n
      +to handle this on a TCP/IP network. The others\n
      +are the local /etc/hosts file\n
      +   (see \"information about other hosts\" menu\n
      +or the NIS system\n
    :T 你可以指示那台名称服务器作为解析主机IP地址\n
      +在TCP/IP 网路中是可以使用 DNS 的，另一种是\n
      +在本机的/etc/hosts中\n
      +  (请参照其他主机的信息 ，菜单\n
      +或NIS 系统)\n
# *** new message
!I_CHGDOMRES
    :E Changing resolver domain to %s\n
    :T 转变解析网域为%s\n
# *** new message
!I_CHGSERVER
    :E Changing DNS server to %s\n
    :T 改变DNS服务器为%s\n
# *** new message
!I_CHGSEARCH
    :E Changing DNS search to %s\n
    :T 转换DNS搜索为 %s\n
# *** new message
!I_UPDATING
    :E Updating %s\n
    :T 更新%s\n
# *** new message
!F_MULTI
    :E Multiple IPs for one host
    :T 一部主机的多重IPs
# *** new message
!T_NAMESERV
    :E Name service access
    :T 名称服务存取
# *** new message
!I_NAMESERV
    :E You must tell the system in which order\n
      +the various name services must be probed\n
      +\n
      +hosts mean /etc/hosts is probed\n
      +NIS stand for Network Information System\n
      +dns stands for Domain Name Service\n
    :T 你必须告诉系统不同服务检查的\n
      +次序\n
      +hosts 表示使用/etc/hosts\n
      +NIS 表示使用网路咨询系统\n
      +dns 表示使用网域服务系统\n
# *** new message
!P_WRITEHOSTS
    :E write /etc/host.conf
    :T 写/etc/host.conf
# *** new message
!E_IVLDIPDNS
    :E Invalid IP number for nameserver %d\n
    :T (nameserver %d)IP 无效\n
# *** new message
!N_CHECKING
    :E Checking dns connectivity
    :T 检查DNS 的连同性
# *** new message
!N_NOTGOOD
    :E Not good
    :T 不错
# *** new message
!N_GOOD
    :E Ok
    :T ok
# *** new message
!E_DNSPROBLEM
    :E The DNS does not answer within %d seconds\n
      +This is bad and will cause major problems later\n
      +Do you want to continue ?\n
      +\n
      +(Note that this may indicate one minor DNS problem\n
      + please consult the help screen for further info)
    :T DNS 在%d秒内没有回应\n这里有问题或将来有可能出问题\n你继续吗？\n
   
# *** new message
!E_DNSCONNECT
    :E DNS connectivity
    :T 连通 DNS
# *** new message
!I_MODIFYUSER
    :E Updating user account
    :T 更新帐户
# *** new message
!H_DAEMONS
    :E Name\tPath\tMod.
# *** new message
!H_NETDEV
    :E Network device
    :T 网络设备
# *** new message
!I_CHANGINGSERVICES
    :E Turning services on and off
    :T 打开/关闭服务
# *** new message
!I_ENABLED
    :E Enabled
    :T 使能
# *** new message
!I_TMPDISABLED
    :E Temp-disabled
    :T 暂时取消
# *** new message
!I_DISABLED
    :E Disabled
    :T 取消
# *** new message
!I_SWITCHING
    :E Switch service %s to %s\n
    :T 转换 %s 服务 %s\n
# *** new message
!H_SERVICEMODEENH
    :E Enabled\tDisabled
    :T 使能/取消
# *** new message
!E_NONETDEV
    :E Missing network device
    :T 没有网络设备
    # *** new mes
!E_IVLDDST
    :E Invalid destination IP number
    :T 无效目标IP
# *** new message
!E_IVLDGTW
    :E Invalid gateway IP number
    :T 无效网关IP
# *** new message
!E_IVLDMSK
    :E Invalid netmask
    :T 无效网络掩码
# *** new message
!F_INTERFACE
    :E Interface
    :T 界面
# *** new message
!F_HOSTNAME
    :E Host name
    :T 主机名
# *** new message
!F_ENABLEHTML
    :E Enable network access
    :T 使能网络许可
# *** new message
!E_ONLYROOT
    :E Only root is allowed to do that
    :T 仅ROOT允许
    # *** new message
!I_USAGE
    :E netconf command line options\n
      +\n
      +    --bootrc rc_dir_path [ previous_rc_dir_path ]\n
      +    --connect site [--fore]\n
      +    --dialctl\n
      +    --disconnect site\n
      +    --initnet\n
      +    --postconnect linuxconf_dialout site ppp-device\n
      +    --postconnect linuxconf_dialin site ppp-device\n
      +    --predisconnect linuxconf_dialout site ppp-device\n
      +    --predisconnect linuxconf_dialin site ppp-device\n
      +    --resetfw\n
      +    --runlevel 0|1|2\n
      +    --runlevel local|client|server\n
      +    --S00linuxconf\n
      +    --S99linuxconf\n
      +    --setdevdef no_device name ip netmask device\n
      +    --setgateway ip\n
      +    --setupdiald site iface mask local remote metric\n
      +    --status\n
      +    --update\n
# *** new message
!I_MISC
    :E Miscellaneous task
    :T 其他
# *** new message
!F_COMMENT
    :E Comment (opt)
    :T 备注（可选）
# *** new message
!T_PRIVSHUTDOWN
    :E May shutdown
    :T 可以关机
# *** new message
!P_SHUTDOWN
    :E shutdown the computer
    :T 关机
# *** new message
!F_REBOOT
    :E Reboot
    :T 重启动
# *** new message
!F_HALT
    :E Shutdown & halt
    :T 关机
# *** new message
!F_DELAI
    :E Delay before shutdown(minutes)
    :T 关机前延长时间（分钟）
# *** new message
!F_MESSAGE
    :E Message
    :T 信息
# *** new message
!T_SHUTDOWN
    :E Shutdown control panel
    :T 关闭控制面板
# *** new message
!I_SHUTDOWN
    :E You can force a reboot or a final shutdown\nof this computer
    :T 迫使启动和关机