@version 0 # *** new message # *** updated message !F_NAMESERV1 :Z nameserver 1 :E IP of name server 1 # *** new message # *** updated message !F_NAMESERV2 :Z nameserver 2 (opt) :E IP of name server 2 (opt) # *** new message # *** updated message !F_NAMESERV3 :Z nameserver 3 (opt) :E IP of name server 3 (opt) # *** updated message !I_SCOPE :Z This dialog let you configure the different commands\n +and daemon linuxconf is using.\n +If you deselect one command, then you must\n +managed this yourself. This facility\n +is provided to help integrate linuxconf into\n +a working setup.\n +*** Unless you know what you are doing ***\n +*** fiddling here is not recommended ***\n :E This dialog let you configure the different commands\n +and daemons linuxconf is using.\n +If you deselect one command, then you must\n +manage this yourself. This facility\n +is provided to help integrate linuxconf into\n +a custom Linux installation.\n +*** Unless you know what you are doing ***\n +*** fiddling here is not recommended ***\n # *** updated message !I_ROUTEHOSTS :Z If your network has access to other networks\n +you must tell how to reach those networks\n :E If your network has access to remote hosts\n +you must tell how to reach those hosts\n # *** new message # *** updated message !F_IPXNETNUM :Z Network number(0=probe) (hex) :E Network number (hex) # *** new message # *** updated message !F_IPXINTERNALNETNUM :Z Internal network number(opt) :E Internal network number # *** new message # *** updated message !F_IPXINTERNALNODENUM :Z Internal node number(opt) :E Internal node number # *** updated message !I_HTMLACCESS :Z You can specify which networks or hosts are allowed\n +to access linuxconf to configure your computer\n +(They need a password still)\n :E You can specify which networks or hosts are allowed\n +to access linuxconf to configure your computer\n +(They need a password still)\n +Linuxconf listen on port 98. Point your browser to\n +http://your_machine:98/ # *** new message # *** updated message !I_SERVICECTL :Z You can selectivly enable or disable\n +any services. You can disable services on a permanent\n +basis or on a temporary basis. Temporary means that\n +Linuxconf will remind you about those and will reactive\n +them at the next reboot. :E You can selectivly enable or disable\n +any services. You can disable services on a permanent\n +basis or on a temporary basis. Temporary means that\n +Linuxconf will remind you about those and will reactivate\n +them at the next reboot. # *** new message # *** updated message !H_DAEMONS :Z Mod.\tName\tPath :E Name\tPath\tMod. # *** new message !I_ROUTENET :E If your network has access to other networks\n +you must tell how to reach those networks\n # *** new message !I_ROUTEALT :E If there are several IP networks sharing the same\n +physical network (wire), you must configure the routing\n +this here # *** new message !H_SERVICESTATUS :E Name\tEnabled\tRunning # *** new message !F_STATUS :E Status # *** new message !T_ONESERVICE :E Control one service # *** new message !I_ONESERVICE :E You can enable/disable a service\nor you can start and stop it manually # *** new message !I_PROBE :E Probe # *** new message !I_NONE :E None # *** new message !B_START :E Start # *** new message !B_STOP :E Stop # *** new message !B_RESTART :E Restart # *** new message !I_RUNNING :E Running !I_TOADDROUTE :Z to add a new route :E Select [Add] to add a new route :T Velg [Ny] for å legge til en ny rute !I_ADDDEF :Z to add a new definition :E Select [Add] to add a new definition :T Velg [Ny] for å legge til en ny definisjon !F_IPALIASES :Z IP aliases :T IP alias eller rekke :E IP alias or range !F_EMPTYSLOT :Z empty slots at the end of the dialog :E Select [Add] to add empty slots at the end of the dialog :T Velg [Ny] for å legge til en tom seksjon på slutten av dialogen !I_ADDDROPIN :Z a new dropin definition :E Select [Add] to add a new dropin definition :T Velg [Ny] for å legge til en ny dropin definisjon !I_USAGE :E netconf command line options\n +\n + --bootrc rc_dir_path [ previous_rc_dir_path ]\n + --connect site [--fore]\n + --dialctl\n + --disconnect site\n + --initnet\n + --postconnect linuxconf_dialout site ppp-device\n + --postconnect linuxconf_dialin site ppp-device\n + --predisconnect linuxconf_dialout site ppp-device\n + --predisconnect linuxconf_dialin site ppp-device\n + --resetfw\n + --runlevel 0|1|2\n + --runlevel local|client|server\n + --S00linuxconf\n + --S99linuxconf\n + --setdevdef no_device name ip netmask device\n + --setgateway ip\n + --setupdiald site iface mask local remote metric\n + --status\n + --update\n # *** new message !I_MISC :E Miscellaneous task :T Diverse oppgaver !E_ONLYROOT :E Only root is allowed to do that :T Bare root kan gjøre dette !X_EXECUTING :E Executing: %s\n :T Utfører: %s\n !X_WOULDEXEC :E Would have executed \"%s\" but not allowed\n :T Skulle utført \"%s\" men har ikke tillatelse\n !X_SIGNALING :E %s %s with signal %d return %d\n :T %s %s med signalkode %d returkode %d\n !E_MISSINFO :E Missing information about daemon or utility %s\nin configuration file %s\n :T Mangler informasjon om demonen eller verktøy %s\ni konfigurasjonsfil %s\n !T_SCOPE :E Netconf scope :T Netconf scope # *** new message !X_SETNISDOM :E Set NIS domain to %s\n :T Set NIS domene til %s\n !E_UNKNOWNDAEMON :E Unknown daemon :%s:....\ndon't know how to support it\n :T Ukjent demon :%s:....\nvet ikke hvordan denne skal støttes\n !P_CHGDATE :E correct the date and time :T sette dato og klokke !F_ZONE :E zone :T sone !F_STORECMOS :E Store date in CMOS :T Lagre tid i CMOS !F_UNIVERSAL :E universal format(GMT) :T Globalt format(GMT) !F_GETDATE :E Get date from server(s) :T Hent tid fra tjener(e) !T_TIME :E Time :T Klokke !F_HOUR :E Hour :T Time !F_MINUTES :E Minutes :T Minutter !F_SECONDS :E Seconds :T Sekunder !T_DATE :E Date :T Dato !F_YEAR :E Year :T År !F_MONTH :E Month :T Måned !F_DAYOFMONTH :E Day of month :T Dag i måned !T_DATETIME :E Workstation date & time :T Dato og klokke !I_DATETIME :E Fill this form to indicate how the workstation must\nget its date and time\n :T Fyll ut denne dialogen for å bestemme hvordan maskinen\n + skal håndtere dato og klokke\n !E_CANTPROBE :E Can't probe current setup of network device %s\n +No way to activate the network\n :T Kan ikke sjekke gjeldene oppsett av nettverks enhet %s\n +Ikke mulig å aktivere nettverket\n # *** new message !E_NODEVICE :E Networking was configured\n +for the interface %s\n +but this device is not configured\n +in the kernel\n # *** new message !T_ROUTEHOSTS :E Route to other hosts :T Ruter til andre maskiner !T_ROUTENET :E Route to other networks :T Ruter til andre nettverk # *** new message !M_DEFROUTE :E Defaults :T Standard rute !M_ROUTENET :E other routes to networks :T ruter til andre nettverk !M_ROUTEHOSTS :E other routes to hosts :T ruter til andre maskiner !M_ROUTED :E the routed daemon :T routed demonen !M_SET :E Set :T Sett !M_CONFIG :E Configure :T Konfigurer !T_ROUTES :E Routes to other networks :T Ruter til andre nettverk !I_ROUTES :E If your network has access to other networks\n +you must tell how to reach those networks\n +For many setup, simply setting the default route\n +is good enough\n +\n +If you only talk to machines on the local network\n +then all this is not necessary.\n # *** new message !I_DEFGTW :E Enter the IP number of the main gateway\n +And indicate if this machine is allowed to\n +route IP packets :T Sett inn IP nummer til hoved ruteren\n +og bestem om denne maskinen kan rute fra andre maskiner\n !F_PRIMNAME :E Primary name + domain :T Maskinnavn + domene !F_ALIASES :E Aliases (opt) :T Aliaser (opsjon) !F_IPADR :E IP address :T IP adresse !F_NETADR :E Network address (opt) :T Nett adresse (opsjon) !F_NETMASK :E Netmask (opt) :T Nettmaske (opsjon) !E_NEEDIP :E Adaptor %d: Missing IP number :T Adapter %d: Mangler IP nummer !F_IVLDIP :E Invalid IP number: %s :T Ugyldig IP nummer: %s !F_IVLDNETIP :E Invalid network number:%s :T Ugyldig nettverks nummer: %s !E_IVLMASK :E Invalid netwask: %s :T Ugyldig nettmaske: %s !Q_NOIP :E Are you sure :T Er du sikker !I_NOIP :E No IP address was entered for the first\n +ethernet adaptor. Either it is a mistake\n +(you forgot) or you don't have a network\n +adaptor at all.\n +\n +If you don't have any network adaptor,\n +it is a good idea to enter the IP number\n +127.0.0.1, which correspond to a dummy\n +internal network. This may help later with\n +network aware application such as X11.\n +\n +Do you want me to enter 127.0.0.1 for you ? # *** new message !T_THISHOST :E This host basic configuration :T Nettverks adapter !I_THISHOST :E You are allowed to control the parameters\n +which are specific to this host and related\n +to its main connection to the local network :T Her kan du konfigurere maskinens nettverks oppsett. !E_OUTOFMEMORY :E Out of memory\n # *** new message !F_IPNUM :E IP number :T IP nummer !T_HOSTNETDEF :E host/network definition :T Maskin/nettverks definisjon !E_IVLIPNUM :E Invalid IP number :T Ugyldig IP nummer !I_HOSTSDEF :E Select a host/network definition to modify :T Velg en maskin/nettverk definisjon !F_FIRSTETH :E First ethernet adaptor :T Første ethernet adapter !F_SECOND :E Second :T Andre !F_THIRD :E Third :T Tredje !F_FOURTH :E Fourth :T Fjerde !F_FIRSTSLIP :E First SLIP/CSLIP channel :T Første SLIP/CSLIP kanal !F_FIRSTPPP :E First PPP channel :T Første PPP kanal !E_IVLDNETLEVEL :E File %s\n +contains an invalid netconf level: %d\n +It must be 0, 1 or 2.\n +Just run \"netconf --runlevel\" with an\n +explicit value (local, client, or server)\n +to fix this.\n +\n +Assuming \"local\" configuration for now.\n # *** new message !E_CANTOPEN :E Can't open file %s\n(%s)\n # *** new message !P_PERMUPDATE :E update the status of the system # *** new message !X_LIST :E List of things required to activate current configuration\n :T Liste over hva som må gjøres for å aktivere gjeldene konfigurering\n !M_INFOR :E Basic host information :T Nettverks adapter !M_HOSTS :E Information about other hosts :T Andre maskiner !M_NETWORKS :E Information about other networks :T Andre nettverk !M_ROUTING :E Routing and gateways :T Ruting !M_RESOLV :E Name server specification (DNS) :T Navnetjener (DNS) !M_NIS :E Network Information System (NIS) :T Nettverk Informasjon System (NIS) !M_ORDER :E Host name search path :T Søkeprioritet for maskinnavn !M_EXPORTS :E Exported file systems (NFS) :T Eksporterte filsystem (NFS) !M_ISOL :E Isolated/simple network from scratch :T Isolert/simpelt nettverk !T_CLIENTTASKS :E Client tasks :T Klient !T_SERVER :E Server tasks :T Tjenester !T_BOOT :E Boot services :T Oppstart tjenester !T_FIREWALL :E Firewalling :T Brannmur !T_NETWORK :E Network configurator :T Nettverk !I_NETWORK :E This package allows you to configure a\n +TCP/IP network from scratch using ethernet\n +and modem (or other serial connection) :T Her kan du konfigurere nettverk, kommunikasjon\nog relaterte tjenester.\n !E_NETCONF :E Netconf: Invalid arguments\n :T Netconf: Ugyldig argument\n !E_NETCONFDEF :E `netconf' without an argument starts the interactive mode\n # *** new message !E_IVLRUNLEVEL :E Invalid runlevel %s for network daemons\n +Values 1,2,3,4,5,6 or local,client,server\n +are valid.\n # *** new message !E_NISSERV :E Unknown NIS server %s\n # *** new message !F_NISDOM :E NIS domain # *** new message !F_NISSERV :E NIS server # *** new message !T_NISCONF :E NIS client configuration # *** new message !I_NISCONF :E You must enter the NIS domain\n +A server must be specified\n +if it can't be probed by a broadcast\n +The server is either specified as an IP number\n +or as a name.\n # *** new message !P_SETTINGNIS :E Setting the NIS domain name # *** new message !E_USAGEDOM :E usage: domainname [ nisdomain ]\n # *** new message !F_ROUTEDREQ :E routed is required # *** new message !F_NOEXPORT :E Does not export any routes (Silent) # *** new message !F_EXPORTDEFRT :E Export your default route # *** new message !T_ROUTEDCONF :E Routed daemon configuration # *** new message !I_ROUTEDCONF :E Check the appropriate options\n +unless you have a simple network, routed\n +is required.\n # *** new message !E_CANTSILENT :E Can't be both silent and a gateway\n # *** new message !E_IVLDEST :E Invalid destination %s for line %d in file %s\n%s\n # *** new message !E_NOKEYGW :E Keyword gw missing from line %d of file %s\n%s # *** new message !E_IVLGTW :E Invalid gateway %s for line %d in file %s\n%s\n # *** new message !E_NETMASK :E Keyword netmask expected, on line %d of file %s\n%s # *** new message !E_IVLOUTPUT :E Invalid content in /proc/net/route\n%s\n # *** new message !F_GATEWAY :E Gateway # *** new message !F_DEST :E Destination # *** new message !T_ROUTESPEC :E route specification # *** new message !I_ROUTESPEC :E Enter either IP number or name\n # *** new message !I_SIMPLEINST :E This option allows you to install\n +a complete network setup, including the names\n +of all machine.\n +\n +This will overwrite the following files:\n + %s\n + %s\n # *** new message !Q_SIMPLEINST :E Installing network from scratch # *** new message !DUMMY_NAME_SERV :E linux-serv # *** new message !DUMMY_NAME_BANANA :E banana # *** new message !DUMMY_NAME_APPLE :E apple # *** new message !DUMMY_NAME_CHERRY :E cherry # *** new message !DUMMY_NAME_ORANGE :E orange # *** new message !DUMMY_NAME_WOLF :E wolf # *** new message !DUMMY_NAME_LION :E lion # *** new message !DUMMY_NAME_MOUSE :E mouse # *** new message !DUMMY_NAME_EAGLE :E eagle # *** new message !DUMMY_NAME_COBRA :E cobra # *** new message !DUMMY_NAME_ELVIS :E elvis # *** new message !DUMMY_NAME_BABE :E babe # *** new message !DUMMY_NAME_ALNOLD :E arnold # *** new message !DUMMY_NAME_ROCKY :E rocky # *** new message !DUMMY_NAME_BOND :E bond # *** new message !DUMMY_NAME_RINGO :E ringo # *** new message !DUMMY_NAME_PAUL :E paul # *** new message !DUMMY_NAME_JOHN :E john # *** new message !DUMMY_NAME_GEORGE :E george # *** new message !DUMMY_NAME_MADONA :E madona # *** new message !DUMMY_NAME_TARZAN :E tarzan # *** new message !DUMMY_NAME_LINUS :E linus # *** new message !DUMMY_NAME_CANADA :E canada # *** new message !DUMMY_NAME_USA :E usa # *** new message !DUMMY_NAME_FINLAND :E finland # *** new message !DUMMY_NAME_FRANCE :E france # *** new message !T_YOURMACHINE :E Your machine name # *** new message !I_YOURMACHINE :E You must select a name for your machine\n +out of this list. Each of your co-networker\n +must select a different name\n # *** new message !M_ACTIVATE :E Activate the changes :T Aktiver endringer !M_PREVIEW :E Preview what has to be done :T Vis hva som skal gjøres !T_STATUS :E Status of the system :T System Status !I_STATUS :E The state of the system is not\n +in sync with the current/updated\n +configuration. You are allowed to\n +make it current, or continue with\n +the current configuration. You can also\n +look at the things that will have to be done\n +to make the system current.\n :T Den operative status på systemet er ikke\n +i samsvar med den gjeldene/oppdaterte\n +konfigurasjonen. Du kan nå aktivere den\n +gjeldene konfigurasjonen, eller fortsette\n +med den operative konfigurasjonen.\n +Du kan også sjekke hva Linuxconf vil gjøre\n +for å aktivere den gjeldene konfigurasjonen.\n !T_THINGSTODO :E Things to do :T Ting som bør gjøres !X_WOULDHAVE :E Would have %s %s\n :T Ville ha %s %s\n !X_STOPPED :E stopped :T stanset !E_IVLBASIC :E Invalid basic configuration of the host\n%s\n :T Ugyldig konfigurering av maskin\n%s\n !E_NOPRIMNAME :E No definition for the primary name\n +in /etc/hosts.\n +There is no entry with the name or alias\n +\"loghost\".\n # *** new message !P_SETHOSTNAME :E Setting the hostname :T Sette maskinnavn !X_SETHOSTNAME :E Setting hostname to %s\n :T Sette maskinnavn til %s\n !E_CANTSETHOST :E Can't set the host name to %s\n(%s)\n # *** new message !E_NOTKNOWN :E %s is not known\n # *** new message !E_HOSTUSAGE :E usage: hostname [-f] [ host name ]\n + hostname -d\n + hostname --domain\n # *** new message !X_STARTED :E started :T startet !E_DNSDOMUSAGE :E usage: dnsdomainname\n(No argument)\n # *** new message !E_UNKHOST :E Unknown host name :T Ukjent maskinnavn !E_NOALIAS :E No kernel support for devices aliasing # *** new message !E_SETALIAS :E Invalid alias setup for device %s\n%s # *** new message !M_ALIAS :E IP aliases for virtual hosts :T IP aliaser for virtuelle systemer !T_IPALIASFORDEV :E IP aliases for device %s # *** new message !I_IPALIASFORDEV :E You can enter alternative IP numbers for a\n +network interface. You can enter several numbers\n +per lines. Many time savers syntax are supported\n +Here are some examples for:\n + 192.168.1.10 192.168.1.11 192.168.1.12\n + 192.168.1.10-12\n + 10-12 # *** new message !T_IPALIASES :E Edit IP aliases configurations # *** new message !I_SYSTEMS :E Each network device may have several\n +IP number. Alternate ones are called alias and are\n +entered here.\n # *** new message !P_UPDALIAS :E to update IP aliases # *** new message !F_DAEPATH :E path of the command # *** new message !T_DAECONFIG :E Daemons and command config # *** new message !I_DAECONFIG :E You are allowed to changed the way\na daemon or command is invoked. # *** new message !F_DAEARGS :E arguments # *** new message !E_IPXFORMAT :E Invalid format of file %s\nCan't manage IPX properly\n # *** new message !F_IPXAUTOCONFIG :E Autoconfigure # *** new message !F_PRIMARY :E primary # *** new message !F_ISPRIMARY :E is the primary interface # *** new message !T_IPXCONF :E IPX interface configuration # *** new message !I_IPXCONF :E You must associate a frame type with\n +a network devices and a network number\n +For one device, it is possible to have several\n +combination of frame and network number.\n +Most linux client machine (IPX client) will be happy\n +by selecting the \"autoconfigure\" choices. # *** new message !M_IPXCONF :E IPX interface setup :T IPX grensesnitt !F_FRAMETYPES :E interfaces frame types :T grensesnitt frame typer !F_FRAMETYPE :E Frame type # *** new message !T_IPXINTERNAL :E Internal net # *** new message !F_IPXENABLE :E Enable # *** new message !F_IPXNETWORK :E IPX networking # *** new message !E_IPXSOCKET :E Can't open IPX control socket\n +Looks ODD to me.\n +Maybe linuxconf is incompatible with the kernel release # *** new message !F_NETWORKHOST :E network or host :T nettverk eller maskin !F_NETMASKOPT :E netmask(opt) :T Nettmaske(opsjon) !T_HTMLACCESS :E Linuxconf html access control :T Linuxconf html tilgangs kontroll # *** new message !M_HTMLACCES :E Linuxconf network access :T Linuxconf nett tilgang !E_IVLDHOSTNET :E invalid host or network: %s\n :T ugyldig maskin eller nettverk: %s\n !E_IVLDMASK :E invalid netmask: %s\n :T ugyldig nettmaske: %s\n !F_LOCALMODE :E No network :T Ikke nettverk !F_CLIENTMODE :E Client mode :T Klient modus !F_SERVERMODE :E Server :T Tjener !T_NETRUNLEVEL :E Network operation mode :T Nettverk operasjons modus !I_NETRUNLEVEL :E # *** new message !E_NETRUNLEVEL :E Change network operation mode :T Endre nettverk operasjons modus !E_IPNOMATCH :E IP %s do not match %s/%s # *** new message !T_MAINACCESS :E 0-May use linuxconf # *** new message !T_PSYSCONTROL :E 0-General system control # *** new message !P_MAINACCESS :E access linuxconf # *** new message !F_BCAST :E Broadcast (opt) # *** new message !E_NETMASKNEEDED :E A netmask is needed for interface %s\n +because you have supplied a network number # *** new message !E_IVLIPINTER :E Invalid IP configuration for interface %s\n +IP address\t%s\t%s\n +Net address\t%s\t%s\n +Netmask\t%s\t%s\n +Broadcast\t%s\t%s\n # *** new message !E_TOOLONG :E The command takes more than %d seconds to execute, odd\n # *** new message !F_MANAGED :E Managed # *** new message !I_MANAGED :E Linuxconf may operate it # *** new message !F_SKIP :E Skip # *** new message !F_ABORT :E Abort # *** new message !I_ABORT :E this session # *** new message !I_KILLCMD :E this command # *** new message !I_CMDTIMEOUT :E The command\n +\n +%s\n +\n +is taking longer than expected to complete\n +Please take action # *** new message !T_CMDTIMEOUT :E Too long # *** new message !I_SKIP :E this command # *** new message !F_KILLCMD :E Kill # *** new message !E_KILLED :E killed by operator # *** new message !B_CONFIG :E Config # *** new message !S_CROND :E Cron daemon # *** new message !S_MOUNTALL :E Mounting local volumes # *** new message !S_FIXPERM :E Checking files permissions # *** new message !S_LOOPBACK :E Setting network loopback # *** new message !S_PORTMAP :E Starting the RPC portmapper # *** new message !S_INETD :E Starting inetd # *** new message !S_LILO :E Checking LILO # *** new message !S_ALIASLOOP :E Setting IP aliases on network loopback # *** new message !S_RETURN :E return %d\n # *** new message !S_SECTBASE :E Checking base configuration # *** new message !S_KMODULES :E Checking kernel's modules # *** new message !S_SYSLOG :E Starting system loggers # *** new message !S_PRTSPOOL :E Starting printer spooler # *** new message !S_SECTCLIENT :E Setting client networking # *** new message !S_IPDEVICES :E Configure network IP devices # *** new message !S_IPXDEVICES :E Configure network IPX devices # *** new message !S_IPROUTES :E Configure IP routes # *** new message !S_ROUTEDS :E Start routing daemons # *** new message !S_NIS :E Starting NIS # *** new message !S_AMD :E Starting automounter # *** new message !S_SECTSERVER :E Setting server networking # *** new message !S_ALIAS :E Setting IP aliases on net devices # *** new message !S_NFS :E Starting NFS service # *** new message !S_UNSETSERVER :E Unsetting server networking # *** new message !S_STOPNFS :E Stopping NFS service # *** new message !S_UNSETCLIENT :E Unsetting networking # *** new message !S_KSENDMAIL :E Stopping sendmail # *** new message !S_KROUTEDS :E Stopping routing daemons # *** new message !S_KAMD :E Stopping automounter # *** new message !S_MOUNTNET :E Mounting network volumes # *** new message !T_CONFIGLOG :E Configuration log # *** new message !I_CONFIGLOG :E These logs shows all configuration commands\nissued by linuxconf # *** new message !E_LEFTBG :E Left running in the background # *** new message !Q_SEELOGS :E Some errors were reported\nDo you want to examine the logs # *** new message !Q_SOMEERRORS :E There were some errors # *** new message !I_PREBOOT :E Tasks before booting # *** new message !I_BOOTING :E Booting # *** new message !I_FIXPERM :E Fixperm session # *** new message !I_UPDATE :E Activating changes # *** new message !I_RUNLEVEL :E Switching runlevel # *** new message !I_PPPPOSTCON :E PPP postconnect commands # *** new message !E_PIDFILE :E Invalid PID file: %s # *** new message !I_LOGACCESS :E in %s # *** new message !F_LOGACCESS :E Log access # *** new message !E_DAEUNKNOWN :E Unknown command or daemon %s # *** new message !I_MISSCMPN :E Linuxconf can't locate the command %s\n +on your system.\n +\n +The command is either missing (not installed)\n +or installed with a different name or path\n +\n +Do you want to change the configuration for this command ? # *** new message !Q_MISSCMPN :E Missing component ? # *** new message !F_PKGNAME :E Package's name # *** new message !F_PKGSTART :E Start command # *** new message !F_PKGSTOP :E Stop command # *** new message !F_PKGRELOAD :E Reload command # *** new message !F_PKGMODULE :E Module name or path # *** new message !F_PIDFILE :E PID files # *** new message !T_ACTIVATION :E Activation control # *** new message !F_STARTAFTER :E Start after package # *** new message !F_STARTLEVEL :E Start at runlevel # *** new message !F_LOCAL :E No networking # *** new message !F_CLIENT :E Client networking # *** new message !F_SERVER :E Server networking # *** new message !F_PKGCONFIG :E Config files # *** new message !F_PKGCOMMENTS :E Comments # *** new message !T_DROPCONF :E Dropin configuration # *** new message !I_DROPCONF :E You can control how Linuxconf will manage\n +a given package, when it will start, stop, and reload/restart\n +and how and why\n # *** new message !F_STOPLEVEL :E Stop at runlevel # *** new message !F_PKGDESC :E Package's description # *** new message !T_DROPINMNG :E Dropin management # *** new message !I_DROPINMNG :E You are allowed to modify, delete and\n +add new dropins. Dropins provide information\n +letting information control and manage add-on package # *** new message !F_PROCNAME :E Process names # *** new message !T_STARTSYS :E Starting %s # *** new message !T_STOPSYS :E Stopping %s # *** new message !F_NORELOAD :E No reload/restart needed # *** new message !F_REVISION :E Dropin revision # *** new message !E_CMDMISS :E Command %s missing\n # *** new message !F_DONTSTOP :E Never stop # *** new message !T_ACTNEW :E Activate new service # *** new message !I_ACTNEW :E The service %s has been added to your system\n + (%s)\n +Do you want to enable it ? # *** new message !O_ENABLED :E Enabled # *** new message !O_TMPDIS :E Temp-disabled # *** new message !O_DISABLED :E Disabled # *** new message !T_SERVICECTL :E Service control # *** new message !I_REENABLE :E Re-enabling service %s\n # *** new message !P_DELDROP :E to delete a dropin # *** new message !T_ROUTEALT :E Route to alternate local networks # *** new message !M_ROUTEALT :E routes to alternate local nets # *** new message !I_PPPDIALD :E PPP diald setup commands # *** new message !T_ADAPTOR :E Adaptor # *** new message !F_CONFIG :E Config # *** new message !T_HOSTHEAD :E IP number\tname & aliases :T IP nummer\tnavn & aliaser !H_SERVICEMODE :E Enabled\tTemp-disabled\tDisabled :T Aktivert\tMidlertidig deaktivert\tDeaktivert !T_NETMISC :E Misc :T Diverse !T_CROND :E Scheduled tasks daemon :T Tidstyrings demon (crond) !T_ALIASES :E IP aliases :T IP alias !T_PORTMAP :E Port mapper :T Port mapper !T_INETD :E Inetd server :T Inetd tjener !T_SYSLOG :E system logger :T system logger !T_KLOGD :E Kernel logger :T Kjerne logger !T_LPD :E Printer spooler :T Skriver spoler !T_ROUTED :E Routed dynamic router :T Routed dynamisk ruter !T_GATED :E Gated dynamic router :T Gated dynamisk ruter !T_YPBIND :E NIS client :T NIS klient !T_AMD :E Auto-mounter :T Auto-monterer !T_NFS :E NFS server :T NFS tjener !T_RARP :E RARP service :T RARP tjeneste !T_FIREWALLING :E Firewalling :T Brannmur !T_KERNELD :E Kernel's modules manager # *** new message !T_NETWORKING :E NETWORKING # *** new message !H_ROUTENET :E Network\tNetmask\tGateway # *** new message !H_ROUTEHOST :E Host\tGateway # *** new message !H_ROUTEALT :E Network\tNetmask\tInterface # *** new message !E_OK :E Ok :T Ok !E_INV :E Invalid :T Ugyldig !F_NETDEV :E Net device :T Nettenhet !F_MODULE :E Kernel module :T Kjernemodul !F_MODIO :E I/O port (opt) :T I/O port (opsjon) !F_MODIRQ :E Irq (opt) :T IRQ (opsjon) !F_ARCNET :E Arcnet adaptor :T Arcnetadapter !F_ATPNET :E Pocket adaptor :T Lommeadapter !F_FIRSTTKR :E First Token ring adaptor :T Første Tokenring adapter !F_FIRSTDUM :E First dummy device :T Første dummyenhet !I_CLASS_A :E Class A network # *** new message !I_CLASS_B :E Class B network # *** new message !I_CLASS_C :E Class C network # *** new message !I_SUBNET128 :E 25 bits sub-network # *** new message !I_SUBNET192 :E 26 bits sub-network # *** new message !I_SUBNET224 :E 27 bits sub-network # *** new message !I_SUBNET240 :E 28 bits sub-network # *** new message !I_SUBNET248 :E 29 bits sub-network # *** new message !E_RANGESYN :E Invalid range syntax # *** new message !T_EXECSYSV :E Executing some Sysv init scripts # *** new message !T_LATEOUTPUT :E Grabbing some late messages from command %s\n # *** new message !F_BOOTCMD :E Boot time cleanup # *** new message !T_BOOTDROPIN :E Dropin's boot time commands\n # *** new message !M_DONTQUIT :E Don't quit # *** new message !E_SETETH0DEF :E netconf --setdevdef can only be used by root\n # *** new message !E_SETGATEWAY :E netconf --setgateway can only be used by root\n # *** new message !E_SETCLOCKMODE :E netconf --setclockmode can only be used by root\n # *** new message !I_NEWMAXALIASES :E Raising kernel max aliases per device limit to %d\n # *** new message !E_TOOALIASES :E Too many IP aliases, maximum %d # *** new message !I_RESETFORNEW :E Unsetting aliases to grow the kernel table from %d to %d entries\n # *** new message !E_BOOTRC :E netconf --bootrc path [ path ] # *** new message !F_MODINST :E (inst) # *** new message !E_DRPNOMODPATH :E Module %s not found for dropin %s # *** new message !I_ARCHIVE :E Configuration archiving # *** new message !I_EXTRACT :E Configuration extraction # *** new message !I_SWITCHCONF :E Switching configuration # *** new message !N_FILEFUTURE :E The file %s as a revision date in the future\n +This probably means that you system time is wrong\n +or as been wrong at some point. # *** new message !M_SERVICESACT :E Services activity :T Tjeneste aktivitet !I_MANUAL :E Manual :T Manuell !I_DHCP :E Dhcp :T Dhcp !I_BOOTP :E Bootp :T Bootp !F_CONFMODE :E Config mode :T Konfigurerings type !I_PCMCIA :E PCMCIA device (removable) :T PCMIA enhet (flyttbar) !P_INITNET :E Intialising the network :T Aktivere nettverket !I_PUBLISH :E Publish an admin tree :T Publiserer et admin tre !I_IMPORT :E Import an admin group :T Importere en admin gruppe !I_SETGATEWAY :E Changing default gateway to %s\n :T Skifter standard ruter til %s\n !X_CONFIG :E Config :T Konfigurere !I_KILLING :E Killing :T Avslutter !E_MISSINGPRC :E Some process missing, full restart of package %s required\n # *** new message !F_AUTORELOAD :E Autoreloaded # *** new message !F_PKGPROBE :E Probe command # *** new message !I_CREATEUSER :E Creating user account :T Opprette en bruker konto !I_DELETEUSER :E Deleting user account :T Slette en bruker konto !I_ADAPACTIVE :E Enabled :T Aktivert !E_SERVICE :E Unknown service %s\n :T Ukjent tjeneste %s\n !I_ROUTERON :E Enabling routing\n :T Aktivere ruting\n !I_ROUTEROFF :E Disabling routing\n :T Deaktivere ruting\n !E_ROUTINGCTRL :E Can't controlling routing with this kernel # *** new message !F_DEFGTW :E Default gateway :T Standard ruter !T_DEFAULTS :E Defaults : Standard verdier !I_ISROUTER :E Enable routing :T Aktiverer ruting !E_NOHOSTNAME :E Host name not defined :T Maskinnavn er ikke definert !E_TOOMSEARCH :E Too many entries in search statement\nin file %s # *** new message !E_IVLDLINE :E Invalid line %d in %s # *** new message !E_TOOMANYSERVERS :E Too many nameservers defined in %s\n +maximum 3\n +\n +If you edit and save, you will loose some entries\n +This is not only a limit of linuxconf\n +but a limit of the system in general\n +See \"man 5 resolver\" # *** new message !F_DNSNEEDED :E DNS usage # *** new message !M_DNSNEEDED :E DNS is required for normal operation # *** new message !F_DEFDOM :E default domain # *** new message !F_SEARCHDOM :E search domain %d (opt) # *** new message !T_RESOLVCONF :E Resolver configuration # *** new message !I_RESOLVCONF :E You can specify which name server will be used\n +to resolv host ip number. Using the DNS is\n +to handle this on a TCP/IP network. The others\n +are the local /etc/hosts file\n + (see \"information about other hosts\" menu\n +or the NIS system\n # *** new message !I_CHGDOMRES :E Changing resolver domain to %s\n # *** new message !I_CHGSERVER :E Changing DNS server to %s\n # *** new message !I_CHGSEARCH :E Changing DNS search to %s\n # *** new message !I_UPDATING :E Updating %s\n # *** new message !F_MULTI :E Multiple IPs for one host # *** new message !T_NAMESERV :E Name service access # *** new message !I_NAMESERV :E You must tell the system in which order\n +the various name services must be probed\n +\n +hosts mean /etc/hosts is probed\n +NIS stand for Network Information System\n +dns stands for Domain Name Service\n # *** new message !P_WRITEHOSTS :E write /etc/host.conf # *** new message !E_IVLDIPDNS :E Invalid IP number for nameserver %d\n # *** new message !N_CHECKING :E Checking dns connectivity # *** new message !N_NOTGOOD :E Not good # *** new message !N_GOOD :E Ok # *** new message !E_DNSPROBLEM :E The DNS does not answer within %d seconds\n +This is bad and will cause major problems later\n +Do you want to continue ?\n +\n +(Note that this may indicate one minor DNS problem\n + please consult the help screen for further info) # *** new message !E_DNSCONNECT :E DNS connectivity # *** new message !I_MODIFYUSER :E Updating user account # *** new message !H_NETDEV :E Network device :T Nettverks enhet !I_CHANGINGSERVICES :E Turning services on and off :T Skru tjenester av og på !I_ENABLED :E Enabled :T Aktiv !I_TMPDISABLED :E Temp-disabled :T Midlertidig inaktiv !I_DISABLED :E Disabled :T Inaktiv !I_SWITCHING :E Switch service %s to %s\n :T Flytt tjeneste %s til %s\n !H_SERVICEMODEENH :E Enabled\tDisabled :T Aktiv\Inaktiv !E_NONETDEV :E Missing network device :T Mangler nettverks enhet !E_IVLDDST :E Invalid destination IP number :T Ugyldig mål for IP nummer !E_IVLDGTW :E Invalid gateway IP number :T Ugyldig IP nummer for ruter !E_IVLDMSK :E Invalid netmask :T Ugyldig nettmaske !F_INTERFACE :E Interface :T Enhet !F_HOSTNAME :E Host name :T Maskinnavn !F_ENABLEHTML :E Enable network access :T Tillat nettverks tilgang !F_COMMENT :E Comment (opt) :T Kommentar (opsjon) !T_PRIVSHUTDOWN :E May shutdown :T Kan skru av !P_SHUTDOWN :E shutdown the computer :T Skru av maskinen !F_REBOOT :E Reboot :T Omstart !F_HALT :E Shutdown & halt :T Skru av !F_DELAI :E Delay before shutdown(minutes) :T Pause før systemet skrus av (minutter) !F_MESSAGE :E Message :T Melding !T_SHUTDOWN :E Shutdown control panel :T System-kontroll !I_SHUTDOWN :E You can force a reboot or a final shutdown\nof this computer :T Sett i gang maskinen på nytt\eller steng den ned